TDS meter| TDS tester| TDS pen| protable TDS meter

Quantity Order:

Payment Method:

Telegraphic Transfer (T/T)

TDS meter| TDS tester| TDS pen| protable TDS meter
Water quality tester
SPECIFICATIONS:
Range: 0~ 9990ppm ( mg/ L)
Accuracy: ± 2% F.S
Calibration: Factory Calibrated
Temperature Compensation: Automatic
Operating Temperature: 0~ 50° C
Power source: 2× 1.5v( button cell)
size: 142X 25X15mm
weight: 36g
OPERATING INSTRUCTIONS
1.remove the protective cap.
2.press the ON/ OFF button once out of the water. The tester will read “ 000�
3. Immerse the tester into the water no more than 2 inches.
4.wait for the display to stabilize. The tester automatically compensates for temperatures variations. Once the readout stabilizes( 10-30seconds) , press the HOLD button to view out of the water.
5.press the ON/ OFF button again to turn off the tester. The tester will shut off automatically after 10 minutes of non-use.
6.after usage, shake off the water from your tester or wipe it with a tissue.
Note: If the tester displays a flashing� X10� icon, multiply the reading by 10.

Recommend to your friends