HPC Series Cone Crusher With High-efficiency HPC

Price:

/

Quantity Order:

Origin:

China

Payment Method:

Telegraphic Transfer (T/T)

Quantity:

100

Pack. & Delivery:

stardard

Application:
HPC series cone crusher with high-efficiency and hydraulic pressure was widely used in mining, concrete factory, sandstone making, etc. The machinery’s pressure resistance strength is under 350Mpa. And they are widely suitable for primary crushing of many kinds of mining and rock such as many kinds of ores, concrete, fireproof material, bauxite, quartzite, corundum, perlite, ironstone, basalt, etc.
Features and Benefits :
1.The new series of HPC cone crusher with high-efficiency and hydraulic pressure equipment is adopted three protecting equipment such as protecting oilcan, locking oilcan and hydraulic driving oilcan. They not only protect the machinery, but could deal with troubles without disassembly the parts.
2.The equipment also can adjust the size of final material. The machinery with high dependability operated very expediently.
3. The crushing chamber specially designed according to particles sink principal and its matching speed can sharply increase the crushing ratio, output and content percentage of cubical product in final crushed material.
4. In the special circumstances such as irons was feed into the crushing chamber together with the materials and there is a jam in the crushing chamber, the hydraulic equipment could open the cover automatically, then the products could output successfully. It greatly reduced the trouble of stopping the machine to output the products artificially. Which makes the maintenance more convenient and with low cost.
5.It is adjusted by hydraulic device and lubricated by the dilute oil. And with locking sleeve assembly, it can overcome the trouble of oil and water being mixed together.
6.The concave and mantle made by high manganese steel. Owing to the change of the concave’s style and the protect of the crushed products, The abrasion of the machine is reduced greatly and can last long compared with the old cone crusher.
Model: HPC-160
Cavity (coarse/fine): C,F
Discharge setting min.(mm): C,13; F,6
Feed opening(mm): C, 150; F,76
Capacity(t/h): C, 120~240; F, 55~180
Power(kw): 160
Werght(t): 13
movable cone diameter(mm): 950

Model: HPC-220
Cavity (coarse/fine): C,F
Discharge setting min.(mm): C,13; F,16
Feed opening(mm): C, 225; F, 86
Capacity(t/h): C, 150~430; F,90~260
Power(kw): 220
Werght(t): 18
movable cone diameter(mm): 1160

Model: HPC-315
Cavity (coarse/fine): C,F
Discharge setting min.(mm): C,13; F,6
Feed opening(mm): C,290; F,100
Capacity(t/h): C, 190~610; 108~320
Power(kw): 315
Werght(t): 26
movable cone diameter(mm): 1400

Model: HPC-400
Cavity (coarse/fine): C, F
Discharge setting min.(mm): C,13; F,6
Feed opening(mm): C, 320; F,110
Capacity(t/h): C,230~700; F, 145~430
Power(kw): 400
Werght(t): 33
movable cone diameter(mm): 1500

åcone crusher:s.�„ÑD™:
Application: This series of cone crushers is widely used in metallurgy, construction, road-building, chemical and silicate industry. They are suitable for crushing mid-hard and above mid-hard ores and rocks and posses the advantages reliable construction, high productivity, easy adjustment and low operation cost. This series of crushers is divided into three kinds: primary crusher(PYB), secondary crusher(PYZ), tertiary crusher(PYD).
Features: 1) high productivity; high quality 2) less machine stop time 3) easy maintenance and low cost 4) unique crushing ability in primary, secondary and tertiary crushing
Structure and working principle: The cone crusher consists of frame, transmission device, hollow eccentric shaft, bowl-shaped bearing, crushing cone, springs and hydraulic pressure station for adjusting discharge opening. During operation, the motor drives the eccentric shaft shell to turn around through a horizontal axle and a pair of bevel gear. The axle of crushing cone swings with the force of eccentric shaft shell so that the surface of the crushing wall is close to the roll mortar wall from time to time. In this way, the ores and rocks will be pressed and crooked and crushed.
§�:

1. Spring cone crusher (%4Ž:, &9'„): ( stone,ŵïåÿbrock)( crusher , cone crusher, pulvrizer, )
crusher Machine are used to smash materials like stone or rock into tiny shards or granules. Shibang crusher series machine can crush most types of rock or stone. Our crusher can also called rock crusher,stone crusher,Cone crusher is one kind of pulverizer just as impactors, roll crushers, jaw crushers. shanghai shibang's stone crusher series that includes Jaw Crusher, Impact Crusher and Vertical Shaft Impact Crusher (sand Making Machine)
The shibang cone crusher has been developed to crush high or medium hardness material ,such as iron ore ,copper ore, limestone, quartz, granite, and sand stones, ect. And The crusher is used in metallurgical, construction, road building, chemical, silicate Industries.The cone crusher has the advantage of reliable construction, high prod activity , easy adjustment and less cost in operation. The spring release system of crusher acts an overload protection system that allows tramp to pass through the crushing chamber without damage to the crusher, use dry oil, water, two kinds of sealed formation. Cone crusher made plaster stone and engine oil separated, assured reliable performance. The type of crushing chamber depend upon the size of feed and fineness of the crushed product. The standard type is applied to medium crushing, the medium type is applied to medium or fine crushing and the short head is applied to fine crushing.

Recommend to your friends