Specification :

Features and Specifications

MVCI is a high performance factory diagnostics and reprogramming interface for TOYOTA TIS. MVCI is compatible with Toyota, Lexus, and Scion vehicles over the J1962 DLC3 connector.

Key Features
l Fully compatible with Toyota TIS Techstream
l Supports Diagnostics, Reprogramming, Active tests, and key programming
l Supports most 1996 and newer Toyota, Lexus, and Scion vehicles with OBDII/ DLC3 diagnostics
l Fully compatible with SAE J2534
l Programmable power supply
l Able to apply 5V-24V to OBD pins 6, 9, 11, 12, 13, 14 or AUX 2.5mm stereo connector
l Able to apply GND to OBD pins 6, 9, 11, 12, 13, 14, 15 or AUX 2.5mm stereo connector
l RGB status LEDs

Supported Protocols
l K-Line ISO 9141
l KWP 2000 ISO 14230-4
l SAE J1850 PWM
l SAE J1850 VPW
l CAN 2.0B ISO 11898
l CAN ISO 15765-4

Specifications
l Operating Temperature: -20 to 70 ? à ( -4 to 158 ?   )
l Storage Temperature: -40 to 85 ? à ( -40 to 185 ?   )
l Diagnostic Interface: 16 PIN
l USB Interface : USB 2.0
l Power: DC 5 V - 36 V
l Consumption: 0.7 W
l Dimensions: 95 mm( 3.74? L x 49 mm( 1.93? W x 28 mm( 1.10? H
l Net Weight: 85 g
l Gross Weight: 193 g

Accessories Included
l User Manual: Instructions on tool operations
l Driver CD: Includes user manual, drivers, and etc.
l OBD II cable: Communicates between tool and vehicle
l USB cable: Communicates between tool and PC/ Laptop
l Carry case: A nylon case to store the tool when not in use.