Specification :

Description of Goods

White erose block flux both melting time and melting temperature of crystal silicon are high and long,and it¡¯s easy to form dross and impurities.HYSR-95Si is designed to solve these problems.

Availability

Any Silicon inclusion aluminum alloys and transformative aluminum alloys.
Directions for use

Adjust the temperature of molten alminium between 730-7700C.Skim off the dross on the surface of molten aluminium. Put HYSR-95Si into the melt(each time of adding should be 2% of the melt),press with a Bell,mix the melt equally for 2-3 minutes.Stir until they are melting and add 2%,repeat until they meet your requirements(can produce 20%Al-Si alloys).If the silicon inclusion is less than 2% in the Al-Si alloys,it can be added for just one time.The adding Silicon processing is decalescence reaction,so you have to keep the temperature above 7300C.

HUAYU Fast Melting Silicon HYSR-Si95
"Silicon inclusion above 95%,quickly diffused in low temperature.Quickly confect alloys,control the composition accurately.
"Simple working,press and stir after adding,the product can be melted into the melt in 5 minutes,recovery will be more than 95%.
"Advanced technology,the microstructure is minuteness,and diffused more equally.
"Perfect refill of Al-Si alloy,no dross and impurities indraught. The quality can be controlled strictly.
"Decrease the melting temperature and shortened the melting time a lot.Reduce the costs a lot.

Packaging: 5kg/bag,20kg/carton

Storage: To be stored in a dry warehouse

Valid date: 12 months