Specification :

Model LCY-III Automatic Binder Recovery Unit

The machine is Performed almost similar to to the European origin machines of this nature. It is used to perform reliable analyze on bituminous mixtures utilizing non flammable non explosion solvents, for quantative determination of binder or bitumen contained in pavement samples and hot mixed mixtures.
The system performs in only one complete automatic cycle: Washing dis aggregations and separation of the bituminous mixture.
Separation of the filler from the solution formed by solvent , bitumen , solvent and filler.Recovery and distillation of solvent material allowing a further utilization.
This unit, in a short time performs out a series of analyses that normally require a long time and labor, by reducing extraction costs. Further more the system largely reduces the emission of toxic fumes in the laboratory and avoids the manipulation of solvents to the operator.
The Unit comprises. An electromagnetic sieving unit , ensuring high quality double vibrating action (Vertical and rotational) and suitable to accept up to eight sieves dia 200mm , and height 50mm. The unit is fore seen of solvent spraying cover for washing and dis aggregations of the sample. the sieving unit is mounted over the centrifugal unit and the washing solution is directly poured into the rotating beaker of the centrifuge.
A continues flow filter less centrifuge, having rotation speed of 11,000 rpm equipped with a stainless steel beaker dia 120mm and the filter capacity approx 400g for every fast and accurate exaction the residual solution is directly poured into the solvent recovery unit.
The solvent recovery unit having reclaiming capacity of approximately 50 liter per hour, equipped with cooling system fore seen of devices switching on and off the the unit to fully automatically perform the test. the recovery unit is additionally equipped with devises for automatic controls and alarm of the functions, promptly signaling any abnormality or failure , allowing the operator a quick intervention without altering the test.A separate control panel allows to program all these functions in a fully automatic system .It also possible to select the manual function allowing to activate each specific function previously analyzed.
The complete extraction cycle is performed out in a approximately 25 minuets.
STANDARDS: ASTM D2172, DIN 1996, CNR A. VII No 38

Main specifications:
Sample capacity: 1000g~1500g
Accuracy: 0.1%
Rev: 5500r.p.m£¬1000r.p.m
Voltage: 380V , 5KW
Weight: 300kg
Dimension(L¡�W¡�H): 1400¡�800¡�1600mm