SF-(series)Heater power regulator

Quantity Order:

Payment Method:

Telegraphic Transfer (T/T)

SF structure with a very compact, the most secure, more convenient
SF structural design, small size, good cooling, excellent performance, Built-in control terminal,
With reed clamp style, need not Crimping terminals, wiring beautiful, safe, fast, zero failure
Main power input and output with security cover design, may not touch any wiring exposed after the part.
FUSE and SCR adopt separation design
FUSE and SCR for high heating element, the heat can be dispersed relocation, Heatsoft reduce heat to increase the
Heatsoft stability and the use of performance, ease of maintenance, extended service life. Can be used FUSE SW. Paul
Fuse switch replaced NFB no fuse switches, reduce costs, such as wiring example A. Or by way of wiring Example B
, With special FUSE seat, not to increase the wiring installation hours.
Distributed heat sink design
Each separate use of a heat sink SCR, SCR share compared to more than just a heat sink, can be greatly enhanced
Thermal efficiency, and reduce the volume.
Choose fixed or rail-mounted screws
Exquisite mold rail body to facilitate mounting.
Cooling with intelligent fan control, extend the life of 50-100%
TH electronic temperature controller accurately detect heat sink temperature, as the fan control and over-temperature protection operation instructions
Heat sink temperature is higher than 55 ¡æ when the fan ON, less than 50 ¡æ when the fan OFF, to avoid running a long time fan,
Extend fan life and reduce dust absorption, and have the boot fan testing.
DIP.SW free to choose the function
Include: DC4-20mA, DC1-5V, DC2-10V, DC0-20mA,
DC0-5V, DC0-10V. Six input signals
Zero or phase function (only single-camera kind)
Manual or automatic reversion anomaly
Output response speed ... etc.

Recommend to your friends