Specification :

Product Name: FLY100 PRO - Honda Diagnostic Tools
Part No.: A126
Net Weight: 0KG

Product Description
FLY100 PRO function list
DTC reading and clearing ( allows the user to read both permanent and temporary DTCs. Once the fault causing the DTC has been found and repaired the DTC tool can then be used to clear DTCs.)
Snapshot function ( capture data relative to a trigger event)
Vehicle data display ( value, line graph, or bar graph formats)
DLC locator diagrams
Data list display ( real-time display of ECU parameters)
System Functional Tests ( allows for more detailed testing of specific parts of the vehicle systems, where the ECU' s support these tests ( e.g. Window movement, Lighting, Vehicle Gauges and engine components) ) .
Onboard tutorial
Immobiliser
Odometer Rewrite

1. Better than GNA600
- FLY100 PRO can programming keys without password, while GNA600 need.
- FLY100 PRO supports dash tuning on-board, while GNA600 can' t do this.
- You can repair the airbag with FLY100 PRO ( only for Accord year 2005 and after) , but GNA600 can' t.
- Program remotes without password! again, GNA600 can' t even program remotes.
- FLY100 PRO supports smart key programming, GNA600 can' t.

2. Better than HDS
- FLY100 PRO using USB2.0, while HDS using COM port.
- HDS do not support Acura, FLY100 PRO does.
- HDS do not support dash programming, FLY 100 PRO can even do in on-board.
- FLY100 PRO supports airbag resetting ( only for Accord year 2005 and after) , HDS does not.
- FLY100 PRO supports remote and smart keys programmer, DHS does not.

Download introduction file ( PDF file, 331KB)
FLY100 PRO covers all function of FLY100 Locksmith Version.

How to use it
First of all, only supports Windows XP or Windows 2000. No Windows Vista.
1. Install FLY100 software in you PC.
You can find the software in the folder of " FLY100 Install" in the CD.
During the installation, you will need a serial number, you can find this number on the surface of the main connector of FLY100.
2. Install patch.
You can find the path in the folder of " Patch" in the CD.
3. Install USB driver for FLY100.
You can find the software in the folder of " USB Driver/ auto-install" .
4. Turn ignition ON.
5. Connect FLY100 to your PC with USB cable.
6. Connect FLY100 to car with OBD cable.
7. Launch FLY100 software that you have installed in step