Specification :

Molybdenum disilicide MoSi2 heating elements is a high temperature furnace heating elements, max temperature is 1800 deg C.

The molybdenum disilicide heating element is composed of cermet of Molibdenum and Silicium ( MoSi2) , which can withstand oxidation at extremely high temperatures ( 1800 ) . These electric heaters have a high efficiency, due to fast warm-up and cooling phases. Low cost, easy mantainance and respect of a clean environment are also an added pro.Typical applications include laboratory furnaces, sintering furnaces, testing equipment, industrial production furnaces, glass melting furnaces, industrial furnaces for heat treatment and metal sintering.

Firm welding point.
Extensively used in the industries of metallurgy, glass, ceramic refractory, crystal electronic device, industrial furnace manufacture, etc..
We are one of the largest manufacturers in China
Except for our shapes on hand, we are be able to produce any other types according your requirement.

MoSi2 Heating Element' s installation:
The brittleness of MoSi2 heating element is relative more under the usual temperature, it also has plasticity under the high temperature. So you had better hang and erect vertically the " U" -shape element. If you need to erect it horizontally, please choose a support of high-temperature insulating materials. The cone-part of the element must extend inside the furnace. At first the fixture of MoSi2 power connector cant be screwed too tightly. When temperature of the element is going up, please twist it tightly again, so the element is not easily broken.

( our suggestion: please choose the specialize power connector provided by our company)
The furnace top must be a good function of heat-preservation. In general, the temperature of furnace top cant be over 300C. The voltage should be low 0.1 between the power connector and the element. In order to avoid radiating heat to pass the connector, the distance is not less than 50mm between the low end of connector and the upside of the ceramic brick.The Dia.6 element can' t be used of 170A for a long time. The Dia.9 element can' t be used of 300A for a long time.