BY negotiation

NSK Single-row Cylindrical roller bearing NU220EM feature higher load-carrying capacity.low noise and superior cage strength.

Product data of NSK Single-row Cylindrical roller....

BY negotiation

FAG Self-aligning ball bearings 2205-TVH are open type, with a cylindrical bore

Product data of FAG Self-aligning ball bearings 2205-TVH
d = 25 mm
D = 52 mm
B = 18 mm
m = 0....

BY negotiation

INA Aligning needle roller bearings PNA17/ 35 ( INA PNA17/ 35) comprise drawn outer cups, plastic support rings with a concave inner profile, outer rings with a spherical outside....

BY negotiation

Timken bearing is the best Tapered roller bearing manufacturer around the world.

Product data of TIMKEN L217849 / L217810 Tapered Roller Bearings

Cone Part Number L217849
....

BY negotiation

Product data of Koyo Single row Tapered roller bearings 32210JR
d 50 mm
D 90 mm
T 24.75 mm
B 23 mm
m0.643 kg Mass
Cr 85 kN Basic dynamic load rating, radial
C0r 105 kN....

BY negotiation

NSK 22214EAE4 Spherical roller bearings with cylindrical bore have pressed steel cages. They can offer particularly high load-carrying capacity, high limiting speeds, and are....

BY negotiation

SKF KM( L) series lock nuts are used in combination with SKF MB( L) series locking washers and keyway for effective locking. They can be mounted and dismounted easily with both....

BY negotiation

SKF FYTB 20 TF Y-bearing flanged units are with an oval flange and two bolt holes through which they can be attached to their support surface with threaded fasteners.

Product....

BY negotiation

OurSKF 30205 J2/ Q Tapered roller bearings are made in SKF German factory. Commonly used in Transmission, gearboxes, wheel hubs, cranes, elevator and lifting equipments etc.

....

BY negotiation

FAG F509-B-L Flanged housings are for bearings with a tapered bore and adapter sleeve. These housings are open on both sides, Felt seals. non-locating bearing housings. Locating....

BY negotiation

INA Yoke type track rollers bearing PWTR3072-2RS are full complement cylindrical roller set, with axial guidance, lip seals on both sides. INA Yoke type track rollers can support....

BY negotiation

INA Track rollers bearing LR50/ 8-2RSR are self-retaining, double row ball bearings with particularly thick-walled outer rings. Their lip seals on both sides can prevent dust and....