Specification :
Type XQL-8 XQL-16
Width (mm) 660 1000
Stroke (mm) 680 680
Diameter of the piston (mm) 150 150
Time Taken by the Stroke (second) 16¡«25 10¡«16
Power (KW) 5.5 5.5
Overall Dimension (LxWxH) 1900¡Ã720¡Ã2580 2240¡Ã720¡Ã2580
Weight (kg) 1500 2000
This bale cutter is mainly used to cut the natural rubber, synthetic rubber, and other plastics materials, especially it is suitable to be installed near the rubber mixer to cut small piece of rubber.
This bale cutter mainly consists of rubber knife, frame, cylinder, base, auxiliary table, hydraulic system, and electric system. The lead is casted on the base under the rubber knife for protecting the edge of the rubber knife. When cuttingthe raw rubber, put the raw rubber under the rubber knife, then press the start button, the knife can cut the rubber. Two limit switches are installed on the frame to control the reversal valve to change the movement direction of the rubber knife, at the same time it protects the cover of the cylinder.
Go to Member Menu