Specification :

The introduction of the production function
The double – glass reactor realizes “ one tractor severs several purposes� in the experiment, satisfying diversify of aspects of different tests. It can be used for the following reactions:
1. Vacuum stirring reaction
2. High-temperature and low-temperature reaction
3. Constant speed running mixing reaction
Distillation , refluence and condensation reaction.
Negative pressure operation and separation
4. To do the rectify through assembling the rectifying pillar
Assembly the production line in accordance of the specific demands.
5. Customize new products based on clients’ different demands.
Mould: HeB-80L
Stirring power: 250W/ 220V
Stirring speed: 50-1400r/ min after the starting up
Motor moment: 3.752N.m Heating power: 7KW( 380V)
The dimension of the whole body: 560× 740× 2670mm
Positive pressure: -0.098MPa N.W.: 92kg
No. Part name Quantity Introduction
1 Double-glass reactor body 1 available capacity: 80L
2 Stirring motor 1 Speed: 1400l/ min ( adaptable)
3 Speed controller 1 igital display function ( continuously viable)
4 5-mouth reactor cap 1 For use with the reactor body
5 Reactor shelf 1 Support the body
6 Condensator 1 distillation condensation
7 PTFE feeding 1 rain the material ( can be demounted)
8 Thermometer bushing 1 Contain the Thermometer
9 Constant pressure dropping funnel 1 To feed under vacuum state
10PTFE stirring bar 1 Stainless steel inner core, covered by the PTFE anti-corruption
11 Vacuum chock plug 2 Used for sealing
12 Distillation flask 1 Used to connect the cap and condensator, to distill and condense
13 Vacuum exhaustion plug 1 Used to extract the air of the reactor to form the vacuum
14 Recycling oil bath pan 1 Controled by the micro-computer , to supply the high-temperature heat resource ( it also has the recycling system, max + 300° C)