Specification :

The composite marble is a new type of decoration materials which is adhibited with a natural stone slab as faceplate and a tile as soleplate. This technology enhances the structure performance and offsets the disadvantages, thus it has become the favorite and popular materials in the construction and decoration field.
Composite marble: Including Glass+ marble Tiles, Aluminum Honeycomb, Aluminum , Ceramic Tile and Granite Tile, they are light, but good for decoration!
1. Standard size: 300x300, 600x600, 800x800mm.
2. Maximum Size: 1220mmx2440mm
3. Usage: Suitable to decoration of inside and outside wall in high building.
4. Performance: light, high intensity, good lever off, good sound insulation, good heat insulation, stroungly aseismatic, fireproofing, antacid, anti-effloresce, wearable, anti-chilliness, anti-pollution, wash easy,
5. Easy installation, few accessorial materials, less labor, less time, more advantages than nature stone.
6. Advantages of Composite Marble Tile:
a) Higher intensity than marble. Marble is easy to broken, but the composite tile is not.
.b) Easy installation ( same as porcelain) . Marble need to brush protect glue for installation, but composite tile not.
c) Light weight and easy transportation. For example, we can only load 350-400 m2 of 2cm thickness marble tiles in one 20container, but we can load 700-800 m2 composite tiles in 20container. So that it may save the transportation cost composite tiles in 20container. So that it may save the transportation cost without any doubt.
d) Easy color selection. Composite tiles can be easier for color selection that natural marble tiles.
e) Wide temperature resistance for epoxy: -40 ~ + 150° C .
f) Good for environmental protection. As we know, natural marble is not recycled resource. Composite tiles can save the natural resource greatly.
Differences between Composite Marble and natural material:
1. Bending strength:
a. Composite marble slab with granite base: 10.68MPa.
b. Composed marble slab with tile base: 12.69MPa.
c. Marble continuous slab: 7.26MPa.
2. Density:
a. Composite marble slab with granite base: 30.76kg/ m2
b. Composite marble slab with tile base: 27.77kg/ m2
c. Marble continuous slab: 53.4kg/ m2
3. Smoothness error:
a. Composite slab: d0.15mm
b. Marble continuous slab: e0.2mm
4.Gloss index:
a. Composite slab: e90
b. Marble continuous slab: d75
5. Longitudinal and transverse direction error, staight edge error:
a. Dimension error after automatic trimming of composite
Slab: longitudinal and transverse direction: d0.3mm; Straight edge errord0.00mm, e0.00mm
b. Marble continuous slab: longitudinal and transverse direction error: e0.4mm, d1.0mm; straight edge error 0.3mm-0.5mm
6. Color difference :
a. Composite slab is processed from good raw stone and big slab .The
Color and texture are almost the same .The construction and erection can
Be finished quickly.
b. Marble continuous slab is processed from normal obsolescent
Materials raw stone .The color and figure differs a lot from each other
.It' s hard in construction and erection
7. Lower cost:
Using high-grade composite slab stone can save 54% of the cost, Project
Time can be assured, while the material is saved
NOTE: The bending strength and absorptions vary depending on the material of granite base or tile base.