Seller:
- raymond mill
Raymond mill, Raymond grinder, grinding mill, grinding machine, milling machine, pulverizer, crusher
Raymond Mill is suitable for producing minerals powder, which is widely used in the fields of metallurgy, building materials, chemical, and mining industry. It can be used to grinding the material that Moh’s hardness degree is below 7, and humidity is in 6% non-flammable explosive minerals’ processing. The final product size is adjustable as required in the range of 100-325 meshes (0.125mm -0.044mm).
Raymond Mill is made up of the Mainframe, Separator, Pipeline System, Air Blower, Jaw Crusher, Hopper Elevator, Electromagnetic Vibrating Feeder, and Electric Control Motor and so on (for details see underlying graph of installation)
Working Process:
The massive material is grinded into the desired size by Jaw Crusher, and then will be delivered to the Silo by the Elevator. Then the material will be fed evenly and continuously into the room of the main frame through vibrating feeder to grind. The powder will be carried away by the air blower. After being separated by separator, those powder conforms to the fineness degree will be blew into the cyclone collector along with the air current through the pipeline, then those fine powder will pass through the powder tube to be the final powder. The air current then will return to the blower again through the upper part of the cyclone collector. The air current system of this machine is the airtight circulation, and the circulatory flow under the negative pressure.
The grinded material in the rubbing room may contain moisture to some extent , the heat generated during grinding makes the moisture evaporated and changes the air current, and since the pipeline joints are not airtight, the external air is sucked in and the circulation air increases. Thus the balance of the air current can be achieved through adjusting air pipe which is between the air blower and the main engine. The superfluous air current will be led into the bag dust catcher; the fine powder that is along with the air current will be collected. And the superfluous air current will be discharged after being purified.
- high pressure suspension grinding mill
High-pressure Suspension Grinding mill is made up of the Mainframe, Separator, Air Blower, Cyclone Collector, Bag Dust Catcher and Air Hose. We can provide the Crusher; Hopper Elevator, Silo, Electromagnetic Vibrating Feeder, Electrical Control Cabinet and some other accessories according to the customers’ demand.
Characteristics:
1. Compared with other grinding mill, the output can increase 10-20% under the same condition. The grinding pressure by rollers to the material can add to 800-1200Kgf on account of the high pressure spring.
2. Minerals that Moh's hardness is below scale 9.3 can be processed.
3. The final products size is extensive, from 0.613mm (30mesh) to 0.033mm (425mesh), and the finest powder can reach to 0.013mm (1000mesh).
4. The dust-removing effect can fully conform to the national standard.
5. The Separator is convenient to adjust.
6. The grinding equipments adopt lapping multilevel seal, which is very effective.
Working Process:
The massive material is grinded into the desired size by Jaw Crusher, and then will be delivered to the storage bin by the lifting machine. Then the material will be fed evenly and continuously into the room of the main frame through Electro-magnetic vibrating feeder to grind. The powder will be carried off by the air blower. After being separated by separator, those powder conforms to the fineness degree will be blew into the cyclone collector along with the air current through the pipeline, then those fine powder will pass through the powder tube to be the final powder. The air current then will return to the blower again through the upper part of the cyclone collector. The above-mentioned steps are repeated.
The grinded material in the rubbing room may contain moisture to some extent , the heat generated during grinding makes the moisture evaporated and changes the air current, and since the pipeline joints are not airtight, the external air is sucked in and the circulation air increases. To ensure the normal work of the grinding machine, the increased air current will be led into the bag dust catcher through the air hose, which separates the Air Blower and the Mainframe; the fine powder that is along with the air current will be collected. And the superfluous air current will be discharged after being purified.
- fine powder mill, micropowder mill
High-pressure Micro-powder Grinding Machine can be used in grinding the regular material, such as kaoline, limestone, calcite, talcum, barite, gesso, ferric oxide red, ferric oxide green, aluminum hydroxide, pigment, bentonite, argil, coal and active carbon that Moh's hardness is below 4, and humidity is 8%, non-flammable explosive minerals’ processing.
Main characteristics:
1, It is of the wide application range.
2, The grinding pressure by rollers to the materials can add to 800-1200Kgf on account of the high pressure spring.
3, Energy-saving, under the same capacity and fineness, the energy cost is only 1/ 3 of the Air Jet Mill.
4, Low investment and high profit, under the same capacity and fineness, the price is only 1/ 8 of the Air Jet Mill.
5, Good craftsmanship, compared with the Air Jet Mill, the Air Jet Mill must first grinding the 20mm material into 100meshes and then can grind the material into fine powder, but the High Pressure Micro-powder Grinding Machine can directly grind the d 20mm material into the fine powder
- Straight Centrifugal Grinding Mill
Owning advanced international technology, the Straight Centrifugal Grinding Machine is our latest grinding machine, which is designed by our experts with great concentration, and it opens an industrial grinding time with high efficiency and low energy consumption.
Working Principle:
In the process of operating, the motor brings along the rollers to drive through the V-belt ring and the central axis. The roller which connects with the bearing and the pendulum shaft hanger revolve with the roller hanger, at the same time, it revolves with the inner round of the ring. The motor of the Air Blower makes the opening of the grinding machine form the negative pressure. There is no dust pollution, and the heat of the machine will be removed.
Dry process:
The material that enters the feeding silo will fall down onto the cone like the waterfall with 360 degree. The material will be grinded into powder by several rollers in turn, and then be discharged through the Vibrating Screen.
Wet process:
The process resembles the dry production; the difference lies in adding water and the dehydration after grinding. This process can be designed according the user's demand.
Features:
1. Energy-saving
The consumption in the Raymond Mil system is 81% of that in grinding machine, but the consumption in the dust catcher of Straight Centrifugal Grinding Machine is only 10% of that in grinding machine. Moreover, several shovels in Raymond Mill consume 25% of the energy of the whole grinding machine; however, this energy consumption will not occur in the Straight Centrifugal Grinding Machine.
2. High-efficiency
With the same diameter of grinding ring and same time, the grinding area of the Straight Centrifugal Grinding Machine is 4 times of that of Raymond Mill.
3. High utilization rate of the wearing Parts
Because of the grinding between grinding roller and grinding ring, once out of use, the useless part is 35% of original weight. Compared with that, the useless part of the Straight Centrifugal Grinding Machine is 65% of original weight on account of the even grinding.
4. Accident Insurance
If the bolt falls into the Raymond Mill, the iron may make shovel and grinding roller hanger distort. However, Straight Centrifugal Grinder hasn't this kind of worries.
5. Easy grinding hard material
when the high rigidity and too hard material such as carborundum, corundum, quartzite, and iron powder will be processed, the middle parts of the Raymond Mill will be grinded and the capacity is reduced rapidly. But the capacity of the Straight Centrifugal Grinding Machine is steady still on account of the evenly grinding.
6. Wet Process:
The straight centrifugal grinding allows the material to add water for grinding.
7. It is of room saving
The Straight Centrifugal Grinding Machine doesn't need to equip Cyclone Separator and pipelines, so the occupation of land is only 50% of that of Raymond Mill.
- Ball Mill
Ball Mill
Application
This series of the machine is widely used in refractory material, cement, glass factory and some other factories to grind the hard material into fine powder. There are two ways of grinding: the dry process and the wet process. The dry process is to grind the material with water, while the wet process does not allow the water into the material. It is a key equipment for regrinding. It is widely used for the cement, the silicate product, new type building material, fire-proof material, chemical fertilizer, black and non-ferrous metal, glass, ceramics and etc. Ball mill can grind ore or other materials that can be grinded either by wet process or by dry process.
Working Principle:
This ball mill is horizontal type and tubular running device, has two warehouses. This machine is grid type and its outside runs along gear. The material enters spirally and evenly the first warehouse of the milling machine along the input material hollow axis by input material device. In this warehouse , there is a ladder scaleboard or ripple scaleboard, and different specification steel balls are installed on the scaleboard, when the barrel body rotates and then produces centrifugal force , at this time , the steel ball is carried to some height and falls to make the material grinding and striking. After grinded coarsely in the first warehouse, the material then enters into the second warehouse for regrinding with the steel ball and scaleboard. In the end, the powder is discharged by output material board and the end products are completed.
Structural Features:
Ball Millis made up of Feeding Part, Discharging Part, Gyre Part, Transmission Part, (Decelerator, Small Transmission Gear, Motor, Electricl Control Cabinet) and so on. The hollow axis adopts the cast steel and the liner can be replaced , the rotating big gear processes in the way of casting rolling gear. The tube structure is wearable well and bears wearable liner. This machine run steadily and works reliably.
Note: for different material and the way of discharging material, the ball mill has dry process ball mill and wet process grid ball mill.
- Super Pressure Trazpezium Grinder
Super Pressure Trapezium Grinding Mill is the new Grinding Mill, designed by our experts on the basis of a long time¡¯s study of High Pressure Suspension Grinding Mill, introducing the advanced technology both at home and abroad. After many years¡¯ effort of our experts and other technicians, we have developed this series of the grinding mill, which is the best in the industrial grinding mill world. It adopts the trapezium working surface, resilient connection, roller linkage pressure adding to get the powder and some other patent technologies, tackles the difficulties in the usage, capacity, energy-cost, short service life. This model of the grinding mill is the best substitute of the Raymond Mill, High Pressure Suspension Grinding Mill, Ball Mill and some other grinding mills.
Super Pressure Trapezium Grinding Mill is mainly used for grinding mineral products in metallurgical industry, building, chemical industry, mine, and etc. And it also can grind all kinds of non-flammable and non-explosive minerals Moh¡¯s hardness is lower than 9 and humidity is lower than 6%. The size of the final products can be adjusted as required. This machine can be used in grinding cement (raw or processed), quartz, feldspar, calcite, gypsum, limestone, dolomite, graphite, coal, coal ash, talcum, granite, marble, barite, porcelain, and some other materials.
- raymond mill/ raymond grinder/ raymond pulverizer/ raymond grinder mill
Raymond mills (Raymond grinder) are those machines that can be used to grind the material into powder in mining, chemical, construction and metallurgy industry.
Raymond Mill (Raymond Grinder) is suitable for producing minerals powder, which is widely used in the fields of metallurgy, building materials, chemical, and mining industry. It can be used to grinding calcite, talc, barite, marble, phosphate ore, slag, active carbon, dolomite, granite, chemical fertilizer, compound fertilizer, gold ore, red mud, clay, kaolin, coke, gangue, porcelain clay, kyanite, fluorte , bentonite, heat-resistance material and some other material that Moh’s hardness degree is below 7, and humidity is in 6% non-flammable explosive minerals(about more than 280 kinds). The final product size is adjustable as required in the range of 100-325 meshes (0.125mm-0.044mm).
Model 3R2115
Max Feeding Size (mm) 15
The final products size (mesh) 80-325(finest 500)
Capacity (T/ H) 0.2-1.5
Rotational Speed of the Central Axis 160Rev
The inner Diameter of Roller (mm) $630
The Diameter of Roller (mm) $210
Height of Roller and Ring (mm) 150
Motor of Mainframe Y200L-8-15KW
Motor of Air Blower Y132M-4-11KW
Motor of Separator Y112M-6-2.2KW
Dimension (L×W×H) 4.6×3.4×5.9
|
|