Specification :

Technical parameter:
1) . Solder ball diameter: 13-50mm
2) . Casting quantity per time: 18pcs
3) . Mould lock cylinder diameter: 80mm
4) . Mould open cylinder diameter: 80mm

Machine structure:
a) . Machine frame: bearing and connecting all components.

b) . Casting mould: Main casting device
c) . Casting board: 18pcs solder ball per time can be casting.
d) . Cooling system: for better cooling and enhance output.
e) . Hopper: collecting the well casting solder ball.
f) . Cylinder system: open and lock the casting board and casting mould.

Operation:
Make sure the air-presser and the cooling water supply in gear. Lock the solder casting board, put the well melted solder into the casting board. Open the solder casting board till the mould well filled and cooled. And the solder ball will falls to the hopper automatically. After cleaning the possible leftover and then start again.