VAG COM KKL interface (com/USB)

Quantity Order:

Origin:

China

Payment Method:

Telegraphic Transfer (T/T)

Quantity:

lots

Pack. & Delivery:

General

VAG COM KKL interface (com/USB)
This diagnostic cable is usable for ISO9141 and KWP2000 transmission protocol like used for example by: Volkswagen, Audi, Skoda, Seat
Features
With this cable & the right software you are able to read/erase error codes and access all devices inside the car which are connected to the service bus. (Such as radio, airbag, dashboard, ABS, ECU, etc.) So it’s the perfect electronic diagnostic system to detect, locate and repair errors!
Specifications
· Connects to PC via RS232
· Working for ISO9141/KWP2000 protocol
· Cable is based on certified ISO9141 Bus Transceivers and RS232 level shifters
· 2 K-Line’s & L-Line (KKL Interface)
· Because of it’s 2 K-Line’s it can also communicate with devices on 2nd K-Line on very new cars like latest Audi model’s
· Bi-Color status LED’s for both K-Line’s
· Powered from car battery over OBD2 connector
What cars does it works on
This diagnostic cable is usable for ISO9141 and KWP2000 transmission protocol like used for Volkswagen/Audi/Skoda/Seat. Here's how to tell if it will work on your car:
EVERY 1996 or newer Volkswagen or Audi has this connector (see picture, it might be a different color). To make sure your car is compatible, just look for this connector. It is usually located under the dash on the drivers side (near the pedals), or next to the ashtray behind a small sliding door. Sometimes it is located in the rear ashtray. The one in the picture is a 1998 Audi. You must have this connector somewhere in your car to be able to use the USB KKL OBD2 Diagnostic cable!

What computer is required?
The only other thing you need is a Computer (PC or laptop) with a serial port. Nothing else!
· Any PC running Microsoft Windows 95 or 98 or ME or 2000 or NT or XP.
· A working built-in Serial or "COM" port. Look at the pictures below to find out if you have a Serial port.
This is what a normal serial port looks like. This is the type of port used by the RS232 KKL OBD2 Diagnostic cable. You must have a serial port built-in to your computer or laptop in order to use the RS232 KKL OBD2 Diagnostic cable.
If your computer has no COM port, you may buy the USB KKL OBD2 Diagnostic cable.
Read & erase error code, log data e.g., speed, gasoline-consume, engine-rotating (RPM: Rotation Per Minutes)

Recommend to your friends