Specification :

The machine is Plastic Water Chamber Clinch Machine. The design of the machine uses two ways of work station, which are main blankholder and side blankholder. The two work station can work independently at the same time so as to improve production efficiency. It can press most varieties of the water chamber at present. The automation level of the machine is relatively high. It' s very simple and quick to change different varieties of water chamber. It uses touch screen and has friendly man-machine interface, which can store 100 water tank ( 200 water chamber) pressing formula. The machine can automatically accomplish the operation of clamping, compact, flanging, blank holding and moving. Through PLC and AC Servo System control.

Application scope and technical parameter:

Length and size of mainboard: Max 750mm Min 100mm
Tooth number of folded blankholder: Max 100
Width and size of mainboard: Max 100mm Min 35mm
Height and size of radiator: Max 1100mm Min 280mm
Avoid gear number of intake pipe and outlet pipe: Top water chamber Max 10 groups, the number of every group is without limitation( unilateral)
Low water chamber Max 10 groups, the number of every group is without limitation( unilateral)
Gear unpressing number: Top water chamber Max 10 groups, the number of every group is without limitation( unilateral)
Low water chamber Max 10 groups, the number of every group is without limitation( unilateral)
Type number of storage radiator: 100 types( 200 types of water chamber)

Power supply voltage AC 220v

Frequency 50Hz
Power 1.28KW

Air supply requirement Pressure P0.4Mpa
Flow Q> 0.3M3/ min
Compressed air through drying and cooling filtration

Overall dimension length: 1875
Width: 1750
Height: 2000

Weight 2.0 T