Specification :

Four-wheel-cylinder Double-cylinder thermoplastic kettle is a kind of trailer walking-style facilities for melting material . The machine equipped with pneumatic ( or hydraulic) brake device , adjust the frequency of the warning lights flashing freely and to ensure full combustion of the low-temperature liquefied petroleum gas burners. The main purpose of its research and development is to reduce the construction of motor vehicles and the configuration of the number of operators , to reduce the construction costs, increase efficiency and safety of the construction site , Also it can be removed the trouble of loading and unloading thermoplastic kettle before and after the construction .
1. Engine: 18HP water-cooled or air-cooled electric start low-noise environment diesel engines. 2. Mixing method: diesel engine through gear pump, double-control valve, relief valve and hydraulic motor and leading mixer to work. 3. Hydraulic Tank: designed with windows, heat sink, and oil temperature displayed tank , the capacity of fuel tank 50L, built-in 68 # hydraulic oil.
4. Heating system : The propane gas cylinders through the valve supply gas for the reactor chamber infrared stoves and external ignition. Infrared heat can save over 30% gas than conventional gas-fired stoves. Users can set different according to the different types of coating material to control the melting temperature ( 0 -300degree) , The fuel can be used more economical , the operation can be more convenient and the material quality can be assurance better.
5. Material cylinder: anti-scorch, high temperature, anti-oxidation arc-type special steel stamping Soup base , vertical vane-type multi-hydraulic mixer, It can be contain more paint and the quality will be better .the capacity of Cylinder is 2 * 350kg.
6. Thermometer: Each cylinder with various pairs of sensor-type heat-proof , Anti-shock thermometer to observe the temperature more convenient and let temperature display more accurate. 7. The operation control: manual duplex control valve separate control mixer in two cylinders to do pros and cons mixing, patented anti-malicious and non-standard operating systems, to better protect the machine from damage.
8. Insulation system: heat-conducting oil or high-tech-filled insulation material, combined with multiple insulation system, the material holding time more longer , less fuel consumption, melting material more efficient.
9. Ventilation exhaust systems: There are four suction-type chimney on the top of the hot melt kettle, discharge the exhaust and soot which produced by the combustion chamber and reactor cavity fully. 10. Outlet: It includes tooth-formed type compact discharge system which can Optional locking discharge , Trough , opening and closing more secure, more accurate and more convenient .
11. Structure: The machine has a Integration high-strength and high temperature resistance welded structure design. Jacket plate is anti-oxidation high-strength and high temperature resistance cold-rolled steel plate, the surface is covered by the wear-resistant and high temperature resistance coating .the pedal is made of anti-skid steel . 12. Safety features: It has overload automatic protection device, in case of emergency , the mixing system can automatically separated, the machine coupled with fire-fighting and lighting devices to ensure the safety of operator and equipment . 13. Dimension and weight: 4500 mm ( length) * 1880mm ( width) * 2280mm ( high) * 2200kg