Specification :

It adopts advanced human-machine interface control system, and has digital control of rotation speed, temperature, air pressure, pump technical data which can be displayed on screen and printed synchronously. Convenient operation realizes the human-machine dialogue .The bench adopts original packing imported frequency converter. Lathe bed is widen and weighted. It presents the following features : super-stability, ultra-low noise, direct output , small fall of rotation speed, high precision measurement , complete automatic protection.

Functions:

1. Measurement of each cylinder delivery and uniformity at any speed.

2. Test point and interval angle of oil supply of injection pump.

3. Checking and adjust the mechanical governor.

4. Checking and adjust the distributor pump.

5. Experiment and adjust of behavior of supercharging and compensatory device.

6. Measurement of oil return of distributing pump.

7. Testing of the electromagnetic valve of distributor pump( 12v/ 24v)

8. Measurement of the internal pressure of distributor pump.

9. Checking of the advance angle of advance device.( on request)

10. Checking the sealing of injection pump body.

11. Install tube of auto-sucking oil supply can check on oil supply pump( including VE pump)

12. Test high precision of rack travel ( on request)

Parameters:

1. Rotation speed range: 0-4000RPM

2. Big/ Small cylinder : 45CC, 150CC

3. Fuel tank volume: 60L

4. Automatic fuel temperature control: 40± 2 :

5. Test fuel filtering precision: 5¼

6. D.C.supply: 12V/ 24V

7. Fuel pressure: low: 0-0.4Mpa, high: 0-4Mpa

8. Air pressure: 0-0.3Mpa

9. 3-phase power supply: 380V/ 50HZ or on request.

10. Flywheel inertia: 0.8KG.m2;

11. Center height: 125MM

12. Output power: 5.5KW
7.5KW
11KW and 15KW or on request

13. Net weight( KG) : 1250.