Supply HastelloyX is solid solution strengthening of nickel-based high temperature high strength alloy

Price:

µçÒé

Quantity Order:

Origin:

China

Payment Method:

Telegraphic Transfer (T/T)

Quantity:

50000

Pack. & Delivery:

ľ�䣬�Ëά£¬Ö½Æ¤

HastelloyX technical specifications

HastelloyX is a solid solution strengthening of nickel-based high temperature high strength alloy

HastelloyX has good oxidation and corrosion resistance at 900 ¡æ, moderate persistent and creep strength, hot and cold formability and good weldability. For the manufacture of aircraft engine combustion chamber components and other high temperature components, the following long-term use at 900 ¡æ, short-term working temperature up to 1080 ¡æ.

HastelloyX similar grades

China: GH3536

United States: UNS N06002

Germany: W.Nr.2.4665

HastelloyX applications

" industrial and aviation turbine (combustion chamber, rectifiers, structural cover)

" Industrial furnace parts, support rollers, gate panels, ribbon and radiation control

" petrochemical furnace coil

" high temperature gas cooled reactor

HastelloyX specifications

Forgings, rod, sheet, strip, ring, wire, bolts, springs to negotiate supply

HastelloyX technical specifications

Forgings ASTM B564

Bar ASTM B572 AMS5754

Plate / strip ASTM B435 AMS5536

Welded pipe ASTM B619

Seamless ASTM B622/626

HastelloyX chemical composition
Typical values (Weight%)

C
Cr
Ni
Co
W
S
P

0.05-0.15
20.5-23.0
I
0.5-2.5
0.2-1.0
¡Ü 0.015
¡Ü 0.025

Mo
Fe
Mn
Si
Cu
B
Ti

8.0-10.0
17-20
¡Ü 1.0
¡Ü 1.0
0.5
0.010
¡Ü 0.015

HastelloyX mechanical properties

Specification
¦È / ¡æ
¦Ò§¾ / MPa
¦Ò0.2/MPa
¦Ä5 /%

Board, with
20
310
725
35

815
110
-
8

Stick
20
275
690
30

815
105
-
10

Tube
20
310
690
25

Ring
20
275
690
30

HastelloyX physical properties

Melting Point :1295-1381 ¡æ

Density: 8.28 g/cm3

Hardness: ¡Ü 241 (HBS)

Magnetic: None

HastelloyX processing

Thermal processing

Hot working temperature range of 1200 ¡æ ~ 1100 ¡æ. To ensure the best creep resistance, thermal processing should be carried out after the solution heat treatment.

Workpiece can be added directly to the highest operating temperature has been warming up the furnace. In the heat baked immediately after the necessary time and processing to specifications. If the metal temperature drops below the minimum required processing temperature heat again

Cold

Cold when the state of the workpiece should be solution heat treatment, work hardening rate than austenitic stainless steel. Should be in the middle of cold rolling annealing process. If used more than 900 ¡æ cold rolling material environment is greater than 10% of the parts needed for final solution treatment.

HastelloyX welding

Alloy has good welding properties, available welding, seam welding, spot welding and other welding methods.

Description: The technical information provided here is only the product description. In the inquiry or issue an order to provide us with a written document shall prevail.

Recommend to your friends