Supply UNS N06002, HasterlloyX, W.Nr.2.4665 superalloy

Price:

µçÒé

Quantity Order:

Origin:

China

Payment Method:

L/C

Quantity:

50000

Pack. & Delivery:

ľ�䣬�Ëά£¬Ö½Æ¤

GH536

UNS N06002, HasterlloyX, W.Nr.2.4665

Has good resistance to oxidation and corrosion resistance at 900 ¡æ, moderate persistent and creep strength, hot and cold formability and good weldability. For the manufacture of aircraft engine combustion chamber components and other high temperature components, the following long-term use at 900 ¡æ, short-term working temperature up to 1080 ¡æ.

Applications
" industrial and aviation turbine (combustion chamber, rectifiers, structural cover)
" Industrial furnace parts, support rollers, gate panels, ribbon and radiation control
" petrochemical furnace coil
" high temperature gas cooled reactor

Supply Specifications
Forgings, rod, sheet, strip, ring, wire, seamless pipe, welded pipe to negotiate supply

GH536 implementation of standards
Bar HB 5497-92
Ring GJB 3020-97
Pipe HB 5494-92
Plate HB 5495-92
GJB 1952-94
Cake pieces HB 5496-92

Chemical composition
Typical values (Weight%)
C Cr Ni Co W S P
0.05-0.15 20.5-23.0 I 0.5-2.5 0.2-1.0 ¡Ü 0.015 ¡Ü 0.025
Mo Fe Mn Si Cu B Ti
8.0-10.0 17-20 ¡Ü 1.0 ¡Ü 1.0 0.5 0.010 ¡Ü 0.015

Mechanical Properties
Specifications ¦È / ¡æ ¦Ò§¾ / MPa ¦Ò0.2/MPa ¦Ä5 /%
Board, with 2,031,072,535
815 110 - 8
Rod 2027569030
815 105 - 10
Pipe 2031069025
Ring 2027569030

Physical properties
Melting Point :1295-1381 ¡æ
Density: 8.28 g/cm3
Hardness: ¡Ü 241 (HBS)
Magnetic: None

Process
Thermal processing
Hot working temperature range of 1200 ¡æ ~ 1100 ¡æ. To ensure the best creep resistance, thermal processing should be carried out after the solution heat treatment.
Workpiece can be added directly to the highest operating temperature has been warming up the furnace. In the heat baked immediately after the necessary time and processing to specifications. If the metal temperature drops below the minimum required processing temperature heat again
Cold
Cold when the state of the workpiece should be solution heat treatment, work hardening rate than austenitic stainless steel. Should be in the middle of cold rolling annealing process. If used more than 900 ¡æ cold rolling material environment is greater than 10% of the parts needed for final solution treatment.

Welding Technology
Alloy has good welding properties, available welding, seam welding, spot welding and other welding methods.

Description: The technical information provided here is only the product description. In the inquiry or issue an order to provide us with a written document shall prevail.

Recommend to your friends