Specification :

Description:

The Ethernet media converter that converts media transmission between UTP Copper cablings and fiber SFP (Small Form-Factor Pluggable) Transceivers. The copper-to-fiber module is available in 10/100Mbps Fast Ethernet types, allowing seamless integration between Fast Ethernet networks using unshielded twisted pair (UTP) copper cabling, and 100M fiber networks.

FEATURES:

- Conversion between different transmission speeds and media types
- Standalone and compact hardware design
- Auto-negotiating Ethernet port (Speed and Half/Full Duplex)
- Auto-crossover Ethernet port (Supports Auto MDI/MDI-X)
- Standard open Fiber slots for SFP Transceiver
- Built-in Link Loss Forwarding Technology
- Easy Installation, Easy Troubleshooting

Specification:
Standard Compliance
¡¤IEEE802.3 10BASE-T
¡¤IEEE802.3u 100BASE-TX
¡¤IEEE802.3x Flow Control and Back pressure
Connector and Interface
¡¤Fiber: SFP 3.3V
¡¤RJ-45 Socket: CAT-5 (10/100Mbps) Twisted Pair cable Auto MDI/MDI-X and Auto-
Negotiation Function Support
Switch Architecture
¡¤Store and Forward
Fiber Parameters
¡¤Fiber Core
o Multi-Mode (62.5/125um, 50/125um)/Single-Mode (8/125um, 10/125um)
¡¤Wavelength:
o 1310nm (Multi-mode ) / 1310nm (Single-mode)
¡¤Fiber Distance:
o Multi-Mode Fiber (2KM) / Single-Mode Fiber (20-120 KM)
Link Loose Forward
¡¤TX to Fiber: If TX port link down, then converter will forced fiber to link down.
¡¤ Fiber to TX: If Fiber port link down, the media converter will forced TX port to link down.