Specification :

Hot sale Car Digital Video Recorder Camera recently upgraded to video resolution 640*480 ,30FPS, support SD card up to 32G. And it will start recording automatically when it turns on.

Record All Video In Your Car With NO INSTALLATION "Plug and Play"

This is new car Recorder, Laser indication Light function can fix the position accurately, Freely display, and free to adjust the angle to adapt the environment of compartment well.Record the outside landscape of the vehicle the conditions when driving and the relevant incidents. It also can record the inside screen and situations.It supplies the insurance company with the evidence of claims. It's used in the traffic enforcement and mobile police affairs of corresponding agencies. It also serves in the movie and television and the word of the guarders.Camera easily mounts in almost any vehicle Easily record the driving conditions in front of you in real time Capture Video for legal orinsurance purpose.

Features :

1. Great for surveillance or FUN.

2. Great for Law enforcement agencies.

3. Extended SD/MMC Card to up 32GB.

4. AAA Battery and it has installed DC slot and can be used together with the Power in the vehicle.

5. Red Laser points to the area being recorded.

6. Adjust Camera angle easily.

7. Video Camera records all Outside and inside events.

8. Uses SD (Secure Digital) Memory Card from 128MB to 32GB.

9. Two Power Options: 12V DC power cord, or 3 x AAA Batteries (not included).

10. Use Video Recordings as evidence for legal and/or insurance purpose.

Installation :

1. Without placing the Camera mount on the dashboard of your vehicle yet, put the Camera on it. Let the fixed slot of Camera opposite to the slot of the Camera mount and connect them with the screw cap. Adjust the corresponding angle, then tightenthe cap slightly in order to adjust the angle in the future.

2. Tear the Two-sided adhesive off the bottom of the Camera mount, and then put it to the corresponding position of thevehicle. Do not connect it to the body of the vehicle at this moment. Through pressing the laser light switch repeatedly toconfirm the general position of which will be recorded. When pressing the laser light switch, the laser light will send out red lightindicating the position that light spot will focus on its area of recording. Press the Camera mount firmly to make sure it hasconnected well to the vehicle.

3. Adjust the Camera's angle again at this moment. In the adjusting process, through pressing the laser light switch repeatedly inorder to confirm the position accurately. Tighten the screw cap after it's adjusted well. The installation is finished.

Operation :

1. Camera may be activated by after it has been placed on the vehicle by pressing the Power switch.

2. Two Power Options:a. Use (3) AAA Batteries (not included)b. Connect one 12V DC Power cord using your vehicle cigarette Lighter.

Attention :

1. This Camera have no internal card, please insert the SD/MMC Card before recording.

2. This Camera records in cycle. when the storage medium is full, it will record from the initial condition and cover the previousrecord file automatically.

3. When the Camera is in work status and the low power indicator flickers, in indicates that the electricity isn't enough, you needto replace the Battery.