Specification :

Ring type joint was initially developed for high pressure and temperature applications found in the petroleum industry and is primarily used in the oil field on drilling and completion equipments. However, today this product range can also be found on valves and pipework assemblies, along with some high integrity pressure vessel joints.
SUNWELL 810 Tolerances ( Inches)
> " A" Width of ring: + / -0.008
> " B" " H" Height of ring: + / -0.020
> " P" Average pitch diameter of ring: + / -0.007
> " 23o" Angle: + / - 1/ 2o
SUNWELL 810 Applicable Standards:
> Ring Joint Gaskets are for oilfield and process industry duties.
> Octagonal shape gasket is belong to API 6A R series
> These gaskets are used in pressures up to 10, 000 PSI, more than Oval ring joint.
> The oval type is the only gasket that will fit a bottom radiused groove.
> Gaskets and not re-used after torque
SUNWELL 810 Gaskets Standard:
Standard style R ring type joints are manufactured in accordance with both API 6A and ASME B16.20 size and ratings. Available in both oval and octagonal configurations, both types are interchangeable on the modern octagonal type grooved flanges.
Packing standard:
Used the small carton packing the gaskets then hand into the wooden case to keep the gaskets safe.
Welcome to send the inquire about Octagonal Ring joint gasket to sunwell.