Specification :

Product Name ST02 Silicone Extruder
ST02 Silicone Extruder
Insulating Glass, Insulation Glass, Insulated Glass, Insulate Glass, Double Glazing, Double Glazed Glass, Double Glaze Glass, Hollow Glass, etc.
Functions and Features:
1.It is composed of raw material pump, solidification pharmaceutical pump, proportional pump, sealant-mixture system, hydraulic pressure system, electric system and so on.
2.Raw material pump, solidification pharmaceutical pump and proportional pump adopt the special high-pressure filling pump and the materials can be supported equivalently in two-way.The raw material pump is compelled by the hydraulic pressure sysem while the solidification pharmaceutical pump is compelled by the pheumatic motor.
3.There are high-pressure valves in the underpart entrance of solidification
pharmaceutitcal filter and material-feeding place of the mixing device and one-way valve is set in the mixing device so as to prevent two-components from fleeing each other.
4.Rising and falling system is controlled by hand valve and the proportion of the two-components can be changed by adjusting the slipper in the swinging pole.Tighening the nut once the demanding scale is reached.

Technical Parameter:
Mixing ration proportion of mixture: 6: 1-14: 1
Raw material barrel: 55Gallon( 200L)
Solidification pharmaceutical barrel: 5Gallon( 20L)
Max.air-consumption volume: 0.5m3/ min
Max.squeeze pressure: 20Mpa
Air source presure: 0.5-0.8Mpa