Specification :

SMS Controller, GSM Telemetry unit, GSM M2M.

The GSM Controller RTU5011 is a universal GSM dialer and controller as well as a GSM Remote Control and Alarm Unit. it provides 8 relay drivable outputs(12V-24V), 4 inputs and RS232 Serial Port. It allows you to monitor and control an alarm or remote stations or equipments or machines by SMS(Short Message Service) Or transport data between user and PLC. Another, it can transmit data from apparatus (thermometer, humidity meter, electric meter, flowmeter) to user or monitoring center by SMS(GSM DTU).

The GSM Controller RTU5010 can be used as:

A switch with SMS remote control. SMS texts for switching particular terminals on/off are configurable.
A timer-switch which can be activated automatically. It can be used as preset when the GSM Controller need work and when it needn‘t work. The user can set 6 appointed time.
A relay with dialling-in remote control. Up to 10 tel. numbers can be authorized for it. Because calls are not answered dialling-in control within GSM is free of charge. (it only checks the caller’s number and - if the number is authorized - responds with relay activation.) This can be used for parking latch control, gsm gate opener, remote control machine, etc.
An automation system. Each input can link to output actions, this is very useful when the temperature upto appointed value, need switch on the air-conditioning immediately, or when water overflow and need switch on the dryer, or when somebody broken into the door or windows need to start the CCTV and Siren.
A SMS reporter. The 4 Inputs activations or deactivations can be reported by SMS and optionally confirmed by phone calls. Each input can have its own message texts and the message can be programmed by users.
A data transporter (GSM DTU, GSM M2M ). The RS232 serial port can be used as remotely collecting the data from PLC or other equipments then send to user and monitoring center, also, it can accept the users SMS commands then transport the commands to the PLC directly.
A GSM Alarm system. the user can arm it or disarm it by SMS. also,the first input can be used as Arm or Disarm button, the other 3 inputs can be used as door sensor, motion sensor, temperature sensor, water overflow sensor, AC power failure sensor, oil pressure sensors, etc.
A GSM Remote Termials (GSM RTU). It can work with the supervisioning center, in the supervisioning center, the own can remote monitoring and control the remotely terminals by GSM Network.This is very useful to street light control, wellhead control, BTS environment monitoring, power transmission system monitoring and other applications.