45 degree Automatic Flammability Tester SL-F06

Quantity Order:

Origin:

China

Payment Method:

Telegraphic Transfer (T/T)

45 degree Automatic Flammability Tester

The specimen rack provides support for the holders in which the specimens are mounted. Its angle of inclination is 450. The rack can be moved sideways to enable fabrics of different thickness to be set at the specified distance from the tip of the jet with the help of an adjusting screw. A built-in finger is provided to gauge this distance for setting it to the desired value.

The Specimen holder consists of two matched stainless steel U shaped plates between which the test specimen can be held. The specimen holder sits over the specimen rack in a precisely determined position 450 inclination and is so positioned that the igniting flame strikes the specimen centrally and 6 mm above the bottom edge perpendicular to the face of the test specimen. Five such specimens holders are provided with the equipment.

The ignition arrangement comprises of a jet mounted on a extension of the shaft of a syncroset motor such that it can be rotated into a position perpendicular to the surface of the fabric. The distance between the tip of the jet and the surface of the burner can be adjusted to 8 mm. When the tip of the jet is moved away from the specimen, the jet becomes vertical. The flame is produced at the tip of the jet by LPG Gas. The length of the flame is set to 16 mm when the jet is vertical with the help of a control valve and is measured with the help of built in gauge rod.

RELATED STADARDS :

ASTM D 1230 - 1985 : Standard Test Method for Flammability of Apparel Textiles.

BS 2963 - 1958 : Tests for the Flammability of Fabrics Method -B- and the 45o Flame Test.

IS 11871 - 1986 : Methods for Determination of Flammability and Flame resistance of Textile Fabrics Method –

The LPG Gas Cylinder needed for conducting the test is to be provided by the purchaser.

Recommend to your friends