Products Catalog

Specification

ISCOM 2110I is layer-2 Ethernet switch especially designed for industrial transmission network access.It offers high range temperature tolerance, up to 6, 000V lighting proof complying GB/ T 17626.5 and IP40 level dustproof features, acting perfectly in harsh outdoor conditions with wide temperature variances and in dusty and sandy conditions.
feature
• High temperature range tolerance: -40~ + 85C working temperature
• IP40 level dustproof
• Lightingproof: up to 6000V in common mode, 3000V in differential mode
• MTU 1632bytes
• Ingress/ egress rate limit, based on port/ VLAN
• Broadcast/ multicast/ DLF storm control
• Link aggregation: up to 6 trunk groups, up to 8 ports per trunk group
• Mirroring: N: 1 port mirroring and mirroring per VLAN, seperate ingress/ egress direction
• Multicast: support 1024 multicast groups, IGMP Snooping v1/ v2/ v3, MVR
• STP/ RSTP/ MSTP, 64 instances
• Flow control: IEEE 802.3x in full duplex mode and back pressure in half duplex mode
• IEEE 802.1q VLAN, 4094 active VLAN
• Port QinQ, flexible QinQ ( 3328 entries)
• Relay: BPDU, DOT1X, LACP
• Support SFP digital diagnostic
• Port backup
• Ethernet ring: max 64 ethernet rings, max 128 devices in each ring
• System management: CLI, Telnet, Console, SSH v2 server, RMON, SNMP, Bridge MIB( RFC1493) , Raisecom NMS, web management, system log
• Cluster: support RAISECOM RNDP/ RTDP/ RCMP
• Autoconfiguration
• DHCP Snooping/ Client/ Option82
• IEEE 802.3ah OAM and extended OAM
• IEEE 802.1ag, Y.1731 protocol, support 256 MEP, 256 MA; support Connectivity check, Loopback, Linktrace, Performance monitor
• Layer-2/ Layer-3 SLA
• MAC-based/ IP-based ACL; ACL hardware filter
• QoS: 4 queues; SP/ WRR/ SP+ WRR scheduling mode
• Safety feature: RADIUS, TACAS+ , PPPoE Agent, DOT1X, ip source guard, dynamic ARP inspection

Specification
• Switching fabric: 5.6Gbps
• 32MB SDRAM, 8MB flash, 128KB switch buffer, 1K IGMP groups, MTU 1632Bytes
• 6x 10/ 100BASE-T, 2x 100BASE-FX SFP, 2x 100/ 1000BASE-X SFP, 1 console, 1 SPDT alarm port
• Indicators: power supply ( flashing) ; system ( flashing) ; 10/ 100BASE-T: FDX, 100M & LNK/ ACT, 1000BASE-X SFP: LNK/ ACT
• Power: DC 18V~ 370V; AC 90V~ 264V
•