Specification :

DIES AND INSERTS
While running in or pulling out tubular at oil rigs the joints ( tool joints) are tightened or loosened with the help of manual tongs or power tongs.
Dies are the principal element in the manual tongs or power tongs which carry out the job of gripping the tool joints, before torque application. ( Rollers or chain are also used for gripping of tubular while using pipe spinners)
SHINEQUIP manufactures tong dies out of best quality alloy steel. The dies are case hardened to a desired depth, while leaving the inner portion ( core) ductile. The hardened surface is highly resistant to wear and exhibits quality gripping of tool joints. The inner ductile core absorbs the shock of sudden impact and heavy torque. The combined effect is efficient operation in the long run. We make dies and inserts meet OEM specifications.

Full Circle Slip Inserts are available for Cavins “ Advance� Spiders, Models
“ B� , “ C� , “ C-HD� , “ E� , and “ G�
OEM PN# SIZE
65622-100 3 1/ 2� slip body assembly
65652-1 2 3/ 8� insert
65652-2 2 7/ 8� insert
65652-3 3 1/ 2� insert
65623-100 4 1/ 2� SLIP BODY assembly
65653-1 3 1/ 2� insert( tubing)
65653-2 4� insert( tubing)
65653-3 4 1/ 2� insert( tubing)
65624-4.75 4 3/ 4� Solid slip body assembly
65624-1 5� Solid slip body assembly
65624-2 5 1/ 2� Solid slip body assembly

TONG DIES:
ITEM PN# Type WEIGHT Amount per PLY Wooden case piece GW ( KGS) Dimension of case ( mm) Volume m³
1 45293 60 2 3/ 8"  0.45 1000 462 570× 500× 460 0.13
2 45293 73 2 7/ 8"  0.44 1000 452 570× 500× 460 0.13
3 45293! 89 3 1/ 2" ! , 102 4"  0.16 3000 492 570× 500× 460 0.13
7 45209  45209 0.072 6000 444 570× 500× 460 0.13

0 1 2 3
PLAIN COARSE PYRAMID BLUE DIAMOND

Figure No. 20 Figure No. 21 Figure No. 22 Figure No. 23

Dies Size Place of Use Interchangeability
Make Equivalent to Part No.
½ : X1 ¼ " x5"
Part No. 5551

½ " x1 ¼ " x5-7/ 8"
Part No. 5552 BJ make Manual Tongs
BJ Make Casing tongs
Top Drive Torque Wrench
Foley Make Manual Tongs
Lamb Make Casing Tong

Iron Rugh Neck
BJ Make Manual Tongs
( Type B, Type DB) Varco - BJ
Varco - BJ
Varco - BJ
Foley
--

--
Varco - BJ 16401
16401
16401
81-937
16401 ( Of Varco BJ)

16402
16402
Note: Die Gripping surface is made is following configurations and can be manufactured as per customer requirements. Add suffix for your requirement after basic part No.

Tong Dies Used for Power Tongs Specifications:
Use for Products Pipe Size( in)
XQ89/ 3YB
XQ89/ 3YC Thin 89 ( 3-1/ 2" )
Middle-thick 73 ( 2-7/ 8" )
Extra-thick 60 ( 2-3/ 8" )
XY114/ 6YB Big arc 89 - 141.5 ( 3-1/ 2" - 4-1/ 2" )
Small arc 73 - 78 ( 2-7/ 8" - 3" )
XQ140/ 12Y ` 73 - 78
a 89 - 114
b 121 - 156

Used for Product Pipe Size ( in) Use for Product Pipe Size ( in)
W-SDS Rotary Slips 2-3/ 8" - 4-1/ 2� 9" Drill Collar Slips 9"
W-SDML Rotary Slips 2-3/ 8" - 5-1/ 2� Casing Slips 6-5/ 8" - 30"
W-SDXL Rotary Slips 3-1/ 2" - 5-1/ 2� WA-C Safety Clamps 3-1/ 2" - 15-5/ 8"
3-1/ 2 - 5 Rotary Slips 3-1/ 2" - 5" WA-T Safety Clamps 1-1/ 8" - 4-1/ 2"
5 - 7 Rotary Slips 5" - 7" QQP60-89/ 585Pneumatic Spider 2-3/ 8" - 3-1/ 2"
W3-1/ 2 / 75 ( 125) Rotary Slips 2-3/ 8" , 2-7/ 8" , 3-1/ 2� QQP60-89/ 675Pneumatic Spider 2-3/ 8" - 3-1/ 2"
W5 / 75 ( 125.200) Rotary Slips 4" , 4-1/ 2" , 5" QQP60-127/ 900 Pneumatic Spider 2-3/ 8" - 5"
DCS-S Drill Collar Slips 3" - 4-7/ 8� Well Repair Manual Tongs 2-3/ 8" - 10-3/ 4"
DCS-R Drill Collar Slips 4-1/ 2" - 7" B Manual Tongs 3-3/ 8" - 12-3/ 4"
DCS-L Drill Collar Slips 6-3/ 4" - 14" DB Manual Tongs 3-1/ 2" - 17"
WT Drill Collar Slips 4-1/ 2" - 11-3/ 4" 13-3/ 8 Casing Manual Tongs 13-3/ 8"
8" Drill Collar Slips 8" Q13-3/ 8 - 30 Casing Manual Tongs 13-3/ 8" - 30