Specification :

Description

Fiber Protection sleeve is used for protecting and supporting the fusion splice point. Single fiber to maximum 12 fibers protection sleeves are available from E-Pphotics. The outer jacket of the sleeve is made of polyolefin while the inner tube is made of EVA. The minimum shrinking temperature is 100 °C.

Features

l Consist of cross-linked polyolefin, hot fusion tubing and Ceramic

l Keep optical transmission performance of optical fiber

l Provide safe protection to optical fiber splicing

l Easily use and avoid any damage to the optical fiber during installation

l Sealing structure provides good performance to the Splicing in the environment with temperature and humidity

Technical Data

Properties
Test Method
Typical Data

Tensile StrengthMPa
ASTM D 2671
18

Ultimate Elongation (%)
ASTM D 2671
700

Density(g/cm2)
ISO R1183D
0.94

Dielectric Strength (KV/mm)
IEC 243
20

Dielectric Constant
IEC 243
2.5

Longitudinal Change (%)
ASTM D 2671
+5

Operating Temperature : -45 – 100 

Shrinking Temperature Range: 90 - 110 

Ordering information

Ribbon Fiber Fusion Protection Sleeve

Single Ceramic Type:

l Strength Member: Ceramic

l Packing: 25pcs/bag

Part No.
Fiber Capacity
Ceramic

Width*Height
Fusion Tube

Width*Height
Heat Shrink Tube

Length
Device’s O.D.

before shrink
after shrink

61400801
8
3.95±0.1*1.95±0.1 mm
3.6±0.1*1.8±0.1 mm
40±1 mm
5.8±0.2 mm
4.6±0.2 mm

NoteOther length and sizes are available on request.