Specification :

Jig is one of the relative new methods for gravity concentration. As a rougher or cleaner device, it is widely applied on the separation of gold, tin, tungsten, titanium, hematite, coal and other minerals due to its high processing capacity, large range of separation size and simplicity of operation and maintenance.
Sawtooth wave jig is a new type of jigs, It is one of the types of modern gravity separation equipment. New it has formed series whose use is expanded. Such type of jig uses electromagnetic stepless speed regulation which features even rotation, smooth ore current, strong adaptability to selected materials, good separation effects of medium and fine grains, and water saving.

Sawtooth wave jig is a energy-saving gravity concentration device which is based on the traditional jig according to the distribution rule of jigging bed theory, its jig pulse curve likes the saw-tooth waveform which makes the upward flow faster than the downward; the upward flow time is short, the downward is long, which overcomes the shortcoming of upward flow, downward flow and action time produced by the sine-wave pulse curve, enhances the loose degree of the bed and alleviates the inhalation effects, then the heavy mineral particles in the ore are fully settlement, which enhances the sorting ratio and recovery of equipment. Compared with the sine-wave jig, the recovery of Sn increases 3.01% , W: 5.5% , Pb: 1.63% , Zn: 2.04% , respectively; water consumption is reduced by 30% -40% , site area is decreased 1/ 3, the stroke can be adjusted, dragging by the electromagnetic adjustable speed motor makes the pumping speed can be adjusted endlessly. Its performance reaches the domestic advanced level, it is one of the ideal energy-saving gravity concentration equipments.
Features:
High quality , precision manufacturing
High capacity, high recovery ratio,
Widely use range, large range of separation size,
Energy conversation, no pollution
Simple installation and easy to maintenance
Technical Parameters
Model
JT1-1
JT2-2
JT3-1
JT4-2
JT5-2

Jigging
Chamber

Shape
trape zoidal
rectangular
trapezoidal
rectangular
trapezoidal
Length
( mm)
450~ 900
1 070
960~ 2000
1510
1200~ 2000
Width
( mm)
1500
1070
1950
1510
3150
Column
Numbe r
single
single
single
single
single
Chamber
Number
( one)
1
2
1
2
2
Single
A rea
( m2)
1
1.14
3.3
2.28
2.12( single)
2.77( double)
Aggregate
Area
( m2)
1
2.2 8
3.3
4.56
5
Feeding Particle
Size( mm)
5
5