SPEEDY 2000 MOISTURE TESTERS
ASTM D 4944; AASHTO T 217

The Speedy is widely accepted for rapid, accurate, and reliable moisture tests on all kinds of materials– sand, aggregates, ores, coal, soils, ceramics, abrasives, and other powders. Units are portable, easy to use and do not require a power supply. Samples can be tested on-site, eliminating risk of moisture loss during transport.

Selection of four available models is based on particle size, percent moisture range, and gauge accuracy desired. Standard Models MA-20A and MA-21A are used for sand, grains, clays and fine powders. Large MA-25 and MA-25C handle soils, aggregates, coal and ores.

All units have tough, die-cast polished aluminum body ( pressure chamber) with integral dial. Place weighed sample in the tester with measured quantity of calcium carbide reagent and seal with cap. Upon agitation, free moisture in test sample reacts with calcium carbonate to form acetylene gas. Pressure gauge reads directly in percent moisture by weight within 1— 3 minutes.

Each Speedy 2000 Kit includes an electronic digital balance, reagent measuring scoop, one can of reagent, brush, cleaning cloth, and instructions in a heavy-duty, waterproof plastic case. MA-25 and MA-25C include two steel balls to pulverize samples

Speedy Moisture Testers for Models MA-20A and MA-21A are 12x4in ( 305x102mm) , LxDia. Model MA-25 and MA-25C are 14x 5.5in ( 356x140mm) , LxDia. Est. Ship Wt.: 15lb ( 7kg) .

Product Information
SPEEDY 2000 MOISTURE TESTERS
- Model : MA-20A Standard Speedy
Particle Size : 10 mm
Moisture Range : 0 - 10 x 0.1%
Weight : 12 g

- Model : MA-21A Standard Speedy
Particle Size : 10 mm
Moisture Range : 0 - 20 x 0.2%
Weight : 6 g

- Model : MA-25 Large Speedy
Particle Size : 20 mm
Moisture Range : 0 - 20 x 0.2%
Weight : 20 g

- Model : MA-25C Large Speedy
Particle Size : 20 mm
Moisture Range : 0 - 50 x 0.1%
Weight : 8 g