Products Catalog

Specification

• Frequency coverage :
* Guaranteed range 144– 148MHz
• Type of emissions : F2D/ F3E ( FM)
• No. of memory Ch. : 207 ( incl. 6 scan edges and 1 call)
• Operating Temp. range : – 20Ú C to + 60Ú C; – 4Ú F to + 140Ú F
( Radio only)
• Frequency stability : ± 2.5ppm ( – 20Ú C to + 60Ú C) at 25Ú C
• Power supply : 7.2V DC
requirement
• Current drain ( at 7.2V DC) :
Tx High ( 5.5W) 1.4A typical
Rx Max. audio 310mA typ. ( Internal SP, 16© load)
180mA typ. ( External SP, 8© load)
Stand-by 65mA typical
Power save 20mA typical
• Antenna impedance : 50© ( BNC)
• Dimensions ( W× H× D) : 58 × 112 × 30 mm;
( Projections not included) 29D32 × 413D32 × 13D16 in
• Weight ( approx.) : 140g; 4.9oz ( without battery pack)
360g; 12.7oz ( with BP-264 and Ant.)
• Output power ( at 7.2V) : 5.5/ 2.5/ 0.5W ( High/ mid/ low)
• Max. freq. deviation : ± 5.0kHz/ ± 2.5kHz ( Wide/ narrow)
• Spurious emissions : Less than – 60dB
• External microphone : 3-conductor 2.5( d) mm ( 1D103) / 2.2k©
connector
• Sensitivity : 0.14¼ V typical ( at 12dB SINAD)
• Squelch sensitivity : 0.1¼ V typical ( threshold)
• Selectivity : 70dB/ 50dB typical ( Wide/ narrow)
• Intermodulation : 70dB/ 65dB typical ( Wide/ narrow)
• Spurious and image : 75dB typical
rejection
• Audio output power : 750mW typ. ( Internal SP, 16© load)
( at 10% distortion) 450mW typ. ( External SP, 8© load)
• External speaker : 3-conductor 3.5( d) mm ( 1D83) / 8©
connector
GENERAL
SPECIFICATIONS
TRANSMITTER
RECEIVER
All stated specifications are subject to change without