Products Catalog

Specification

Tracker 280 Specification
Display
Type: 14.2mm high brightness red LED (green option)
Range: 6 digit (-199999 to 999999)
Resolution: Selectable for real time and totalled values
Update rate: 2, 4 or 10 per second (programmable)
- Also dependant on input rate (timer modes)
Inputs
Two inputs, each configurable for: AC magnetic pickup, contact closure,
TTL logic and (NPN/ PNP)
Measurement: Up to 150Khz
Time base/measurement accuracy: Better than 100ppm
Pulse/frequency: User scaling for both channels. Adjustable gate time.
Isolated to all other inputs and outputs except for the status inputs and
excitation supplies. Not isolated between input channels
User linearisation: 8 point per channel, for frequency and timing modes
Transducer Supplies
5 or 12VDC up to 100mA. Not isolated to the signal inputs
Measurement Modes
Count (6 or 12 digit) and totalisation, up / down and quadrature count,
dependent on the phase or state of channel B. Frequency and timing
measurement with integrated totalisation. Scaling to engineering units for
all modes (e.g. Pulse rate to rpm, time period to mph or kph etc.).
Maths Functions
Pre-set, Tare or Zero (programmable), Max/Min memory, Ch1 - Ch2,
Ch1+Ch2, count up/down, Elapsed Time, Totalise Time, Average Times,