Specification :

Viton Rubber sheet

Viton Rubber Sheet can provides extraordinary levels of resistance to chemicals, oil and heat.The highest temperature Viton can resistant is up to 300 C. Viton Rubber Sheet is used for many applications, including gasket making, roll covers, baffles & bumper strips.

We currently supply below sizes as stardard for your selecting:

1000mmx1000mmx1mm to 50mm
1200mmx1200mmx1mm to 50mm
1000mmx10mx from 1mm to 25mm
1200mmx10mx from 1mm to 25mm
1500mmx10mx from 1mm to 20mm
1800mmx10mx from 2mm to 20mm
2000mmx10mx from 2mm to 20mm

Color available is black, red, white, blue, green etc.

Finish: Smoothly finished or both side fabrics impress on finished.
Insertion: common cloth insertion or nylon fabric insertion

TYPICAL PHYSICAL PROPERTIES AND VALUES:

Hardness, Shore A 70
Specific Gravity ( DENSITY) 1.9g/ cm3
Tensile Strength 6mpa
Enlongation Break 150%
Compression set maximum 20% Heat Aging( 70 Cx72hours)
Tensile Strength Change 10%
Elongation Break 15%
Handness Change 10%

Other specifications we can produce per your request.

Viton

Viton is a registered trademark for fluroelastomer by DuPont Performance Elastomers L.L.C. This fluoroelastomer was introduced in 1957 to meet the requirements in the aerospace industry for a high-performance elastomer. The use of Viton has spread quickly to many other industries, including the fluid power, automotive, appliance and chemical industries. Viton® is the most specified fluoroelastomer, well known for its excellent heat resistance, excellent resistance to aggressive fuels and chemicals. This popular fluroelastomer has worldwide ISO 9000 and ISO/ TS 16949 registration.