CE-175 COMPRESSION MACHINE
ASTM C-109

For determining compressive strength of cement mortar
For sample size 2" x 2" x 2" cube or 2" dia. x 4" height cylinder.
Steel frame, 12" ....

AG-750 Aggregate Impact Test
BS-812

For determining the aggregate impact value and resistance of aggregate to sudden shock or impact.
AG-751 Impact Machine Heavy duty....

SO-130A Standard Penetration Test
ASTM D-1586 AASHTO T-206
For driving a split barrel sampler to obtain a representative soil sample and measure the soil resistance to penetration....

SO-515 Consolidation Test Set
ASTM D-2435 AASHTO T-216

For determining the rate and magnitude of consolidation of soil when it is restrained laterally, loadded and drain axially.....

SO-140 Sample Extruder
For extruding soil speciment from 68 mm sampling tube, welded steel, screw type. Supplied without sampling tube.

Also required, but not part of this set:
....

SO-315 Plastic Limit Test Set
ASTM D-4318 AASHTO T-90

For determining plastic limit of soil sample.
SO-316 Plastic Limit Plate Glass made
Consist of :
SO-316.1 Reference Rod....

SO-280 TVA Penemometer

Widely used in analyzing soil surface.
SO-281 Penetration Rod and Chamber Steel pipe, 65 cm length with hydraulic chamber
Consist of :
SO-281.1 Penetration....

SO-450 Moisture Content Test Set

For determining moisture content of soil sample.
GE-150 Cent O-Gram Balance 311 gr cap., 0.01 gr sens 1 Pc
GE-174 Drying Oven 53 ltr capacity, ....

SO-525 Direct Shear Test Set
ASTM D-3080 AASHTO T-236

For determining shearing resistance of soil sample.
SO-526 Loading MAchine
Consist of :
SO-526.1 Frame Welded steel frame....

AG-111 Gilson Sample Splitter

Painted plate frame, alumunium chute, variable chute width, 1/ 2" increment ( 1/ 2" , 1" , 1 1/ 2" , 2" , etc) , supplied with pans.
Dimension ( l x w x h) : ....

AG-180 Thickness Gauge
BS-812

For determining the flakiness index of coarse aggregate. Galvanized metal sheet, hole size 100 x 33.9, 90 x 26.3, 80 x 19.7, 60 x 14.4, 50 x 10.2, ....

AG-621 Bottle Roller
BS-812 ASTM C-117

Electric, 220 V, 100 Watt, 50 Hz, 1 Phase, 80 RPM. Supplied complete with 1 kg capacity glass jar.

Dimension ( l x w x h) : 60 x 30 x 90 cm....

AG-920 Soundness Test Set
ASTM C-88 AASHTO T-104

For determining aggregate resistance to desintegration by saturated solution of sodium sulfate or magnesium sulfate.
AG-921 Stock....

CE-170 Compression Machine
ASTM C-109

For determining compressive strength of cement mortar
For sample size 2" x 2" x 2" cube or 2" dia. x 4" height cylinder.

Dimension ( l x w x....

GE-950 Mortar Mixer
Heavy Duty Mixer
Bench model, supplied complete with beaters.

Technical Features:
â € ¢ Wattage : 325 W
â € ¢ Voltage: 220-240 V
â € ¢ Hertz: 50-60 Hz
â € ¢ Product....

CE-120 TIME OF SETTING OF HYDRAULIC CEMENT BY VICAT NEEDLE

ASTM C-187/ C-191
AASHTO T-129/ T-133

For determining normal consistency and time of setting of hydraulic cement

CE-121....

CE-160 COMPRESSIVE STRENGTH OF HYDRAULIC CEMENT MORTAR

ASTM C-109
AASHTO T-106

For determining compressive strength of hydraulic cement mortar by using 2" cube speciment

CE-161....

CE-160A COMPRESSIVE STRENGTH OF HYDRAULIC CEMENT MORTAR
ASTM C-109, AASHTO T-106

For determining compressive strength of hydraulic cement mortar by using 2" cube mold

CE-161 A....

CALCIUM CARBIDE
FOR SPEEDY MOISTURE TESTER
TYPE SO-435
AASHTO T-217

BI-470 MOT STRAIGHT EDGE

For measuring the irregulation of road surface both asphalt and concrete pavement

BI-471 Mot Straight
Alumunium profile, 3 meter length, with handle 1....

COâ € ” 555 CALIBRATION ANVIL
ASTM C-805

For periodic calibration of concrete test hammer CO-550, complete with hammer guide

Dimension ( l x w x h) : 20 x 20 x 30 cm
Gross Weight : ....

COâ € ” 500 MODULUS OF ELASTICITY IN CONCRETE TEST SET

For measuring average axial deformation of concrete cylindrical sample during compression test, cast alumunium, dial indicator....

BI-100 SPECIFIC GRAVITY OF SEMIâ € ” SOLID BITUMINOUS MATERIALS

ASTM D-70 AASHTO T-228

For determining the specific gravity of semi-solid bituminous materials, asphalt cement, and....

8BI-230A LABORATORY PENETRATION TEST SET
ASTM D-5, AASHTO T-49

For determining consistency of bituminous materials

BI-231A Penetrometer
Electric control box, 220 V-AC variable....

SO-250 PLATE BEARING TEST SET
ASTM D-1194 AASHTO T-235

For determining ultimate bearing capacity of soil on place by means of field loading test.

SO-251A Hydraulic Jack
50 tons....

COâ € ” 410 VIBRATING TABLE

Steel construction 50 x 50 cm table Separated control box, variabel speed up to 3.600 rpm. For compacting aggregate in steel container or concrete sample....

SO-360B LABORATORY CBR TEST SET
ASTM D-1883, AASHTO T-193

For determining the bearing ratio of soil.

SO-361B Mechanical Loading Machine
Steel frame, hand operated, two speeds, ....

Triple Beam Balance, OHAUS 750 SW

Special Features

The Ohaus Triple Beam Balance ( 750-SW) is well-equipped to handle any weighing job, whether you ´ re weighing solids, liquids, ....

Hydraulic Cylinder

GE-681 Hydraulic Cylinder 30 capacity
GE-682 Hydraulic Cylinder 50 capacity
GE-683 Hydraulic Cylinder 100 capacity
GE-684 Hydraulic Cylinder 150 capacity
GE....

GE-174 / GE-191 / GE-200
Oven ( Memmert)
Universal oven, double walled metal shield.
temperature range from room temperature t0 200oC
GE-171 Drying Oven 14 ltr capacity, internal....

BI-220A Loss on Heating/ Thin-Film Test
ASTM D-6/ D-1754
AASHTO T-47/ T-179

For determining the loss in mass ( exclusive of water) of asphaltic compounds after heating
BI-221....

BI-150A Saybolt Viscosimeter
ASTM D-88 AASHTO T-72

For determining saybolt viscosity of petroleum products at specified temperature between 21.1 and 98.8 C.
BI-151 Viscosimeter....

GE-150 / GE-152 / GE-157 / GE-159 / GE-161
Cent O-Gram Balance
GE-150 Cent O-Gram Balance 311 gr capacity 0.01 sensitivity

GE-151
Cent O-Gram Balance 311 gr capacity 0.01....

GE-101.6 / GE-137 / GE-140
Proving Ring

Precision measuring device, high grade steel with plated finishing 3/ 4" tapped hole at both end. Supplied complete with dial and....

Liquid Limit Test Set
ASTM D-4318 AASHTO T-89

For determining liquit limit of soil sample.
SO-311 Liquid Limit Device Hand operated, brass cup, hard rubber base 1 Set
SO-312 ASTM....

MI-130 Rain Gauge
Bucket type 100 cm2 mouth area, made of metal sheet, supplied complete with measuring glass with special scale.

AG-700 Los Angeles Abrassion Machine
ASTM C-131 AASHTO T-96

For measuring degradation of mineral aggregates from abrassion, impact and grinding.
AG-701 Los Angeles Abrassion....

CO-330 Hydraulic Concrete Beam Testing Machine
ASTM C-78

For determining the flexural strength of concrete beam by using a simple beam with third point loading. 100 kN cap., ....

LABORATORY TEST SIEVE

Coarse Series ;

AG-200 A Sieve 4"
Mesh 101.6 mm opening
AG-201 A Sieve 3 1/ 2"
Mesh 88.9 mm opening
AG-202 A Sieve 3"
Mesh 76.2 mm opening
AG-203 A ....

SO-150 A, DYNAMIC CONE PENETROMETER

For rapid determination of field CBR value ( rapid quality control) .
SO-151 Handle Stainless steel 1 Pc
SO-152 Hammer Machined steel, Painted, ....

HAND BOR ( SO-110A)

Drilling for soil sampling preparation.
SO-111 Drilling Rod Solid bar, 1mtr length, 1 1/ 4" dia 10 Pcs
SO-112 Iwan Type Auger Welded steel, two radial blades, 4....

SO-338 Mechanical End Over End Shaker
BS-1377
Electric, 220 V/ 50 Hz, 1 Phase, 50 RPM. Supplied complete with 2 glass jar 1000 ml and rubber bungs

Dimension ( l x w x h) : 40 x 60....

SO-395 A Compaction Permeameter Test Set

For determining coefficient of permeability of compacted soil sample.
SO-395 Compaction Permeameter 1/ 13.33 cu. ft. mold, 6" i.d., inlet....

BI-310, Reflux Extractor Test Set
ASTM D-2172 AASHTO T-164

For determining bitument content in hot mixed paving mixture and pavement sample
BI-311 Reflux Extractor

Consist of : ....

SO-270 Proving Ring Penetometer

For determining penetration resistance of soil layers.
SO-271 Penetration Rod Round bar, 3/ 4" dia., 51.5 cm/ 49 cm length with 5 cm increment lines....

BI-320, Marshall Test Set
ASTM D-1559 AASHTO T-245

For determining the resistance to plastic flow of cylinder specimen of bituminous paving mixture loaded on the lateral surface....

CE-110 SPECIFIC GRAVITY OF HYDRAULIC CEMENT TEST
ASTM C-188
AASHTO T-133

For determining specific gravity of hydraulic cement

CE-111
Le Chatelier Flask
250 ml cap., the neck....

BI-400, Core Drilling Test Set

For cutting core samples from asphalt, concrete and other material on the road, run ways and structures.

BI-401 Core Drilling Machine Cast....