The programmable sequential controller is designed specifically for use with pneumatic dust collector systems. It is used to control the solenoid of the diaphragm valve in order to program the pulse....

Features Highly strengthened aluminum body Low frequency/ continuous impact model, sudden activation/ deactivation is allowed Frequency and amplitude of impact can be adjusted as required ....

Features Special aluminum alloy, small size, light weight Fine enclosure protection can be applied in high humidity dust working area Frequency and amplitude of vibration can be adjusted as....

The diaphragm valves are used specifically in the dust collector system. The valve consists of 2 air chambers divided by a piece of diaphragm. The 2 chambers are connected through an air passage ( ....

Principle The single unit or multiple reed switch units arehoused tightly in stainless steel or engineeringplastic stem, and the permanent magnet issealed into the middle of the specified float....

Principle When the magnetic field of permanent magnet inside the float is moved into to the proximity of the reed switch inside the stationary stem, the reed switch " snaps" the contact together....

The SMTIP multifunction manifold is for group assemblies of I/ P transducers. This manifoldâ € ™ s outputs function in a similar way to the SMTâ € ™ s.

The SML multifunction manifold also operates in a similar way to the SMT, except the SML has additional exhaust ducts which direct air out of the casing, away from the electronic components inside....

DCS104 Series - Direct threaded with air vent - Double laser welding diaphragm - High temperature and corrosive application - Pipe connection, specific connection available - Diaphragm SS316L, ....

AM200 Series - 2 Ways Manifold - Instrument isolation, calibrating and venting - Wetted parts SS316 * AM201) , Carbon steel ( AM202) - VITON o' ring, TEFLON back up ring - Maximum working press.....

AE400 Series - Multiport Needle Valve - Multi-port gauge valve for instrument installation - Design wetted parts SS316 - TEFLON packing, DELRIN seat, NBR blue dust cap - Design working press. 400....

AE300 Series - Mini Needle Valve - Instrument isolation needle valve - Design wetted parts SS316, option Carbon steel - VITON o' ring and seat, NBR blue dust cap - Design working press. 400 psi / ....

AE200 Series - Bleed Needle Valve - Instrument isolation needle valve with bleed valve - Design wetted parts SS316, option Carbon steel - DELRIN seat, TEFLON back-up ring, NBR dust cap - Design....

AE100 Series - Needle Valve - Instrument isolation needle valve - Design wetted parts SS316, option Carbon steel - DELRIN seat, TEFLON back-up ring, NBR dust cap - Design working press. 6000 psi....

AD Series â € “ In-Line Check Valve - Instrument flow direction control - Stainless steel wetted parts, optional brass - Max. working pressure 125, 400 and 700 bar - Conn. type Female x Male, ....