Specification :

INSTRUMENTATION CABLES

At Rajsav India Private Limited, we are manufacturing a wide range of Instrumentation Cable used for electronic Control Panel , Control Instruments, Computing Systems and Networking of Instruments. Also designing and developing the Cable as per the custom designed parameters based on national & international standards.

1. CONSTRUCTION OF CABLES
• CONDUCTOR: Solid / bunched / stranded copper bare / tinned from 0.25 mm2 to 1.5 mm2.
• INSULATION: PVC / polyethylene / polypropylene extruded cores identified by colours / number printing.
• FORMATION: 1/ 2/ 3/ 4 core are twisted to form singles / pairs / triads.
• INDIVIDUAL SCREENING: Pair / triads are screened by copper wire / shielded by aluminum mylor tape with drain wire.
• ASSEMBLY: Singles / pairs / triads are laid up.
• FINAL SCREENING / SHIELDING: Laid up cable is finally screened by copper wires / shielded by aluminium mylor tape with drain wire.
• ARMOURING: Galvanized steel wire / strips are used.
• SHEATHING: An extruded layer of PVC is applied in different colours as required.

RAYHON Unshielded Instrumentation Cable
Wide range of Unshielded Multicore/ Pair overall polyester tapped tinned/ Bare Copper having different sizes of 7/ 0.15, 14/ 0.15, 16/ 0.20 and 24/ 0.20 Cable with overall PVC sheath Black & Grey in colours.
Nominal overall diameter in mm
No. of Core 7/ 0.15mm 14/ 0.15 mm 16/ 0.20 mm 24/ 0.20 mm
3 4.05 4.90 5.70 6.50
4 4.40 5.20 6.20 7.10
6 4.90 6.00 7.20 8.20
8 5.40 6.50 7.90 9.30
10 6.10 7.40 8.80 10.10
12 6.60 8.90 9.40 10.80

RAYHON Shielded Instrumentation Cable
A wide range of multicore/ pair aluminum mylor tapped shilelded with Tinned Copper wire braided overall PVC sheathed Cable having the conductor size of 7/ 0.15, 14/ 0.15, 16/ 0.20 and 24/ 0.20 are used for data signalling and interconnection from one point to the equipment.

Nominal overall diameter in mm
No. of Core 7/ 0.15 mm 14/ 0.15 mm 16/ 0.20 mm 24/ 0.20 mm
3 4.40 5.50 6.30 7.30
4 4.90 5.80 6.80 7.90
6 5.40 6.60 7.75 8.80
8 6.00 7.30 8.45 9.80
10 6.60 8.15 9.45 10.80
12 7.10 8.70 10.00 11.50

D.C. Resistance per Km. at 20 C max.
162.8 Ohms 81.4 Ohms 40.1 Ohms 26.7 Ohms
2. STANDARD SPECIFICATION
BS 5308, VED 0815 or any other national / international standard / as per designed based on customer’ s requirements.
3. APPLICATION:
These cables are widely used for electronic control panels, computing systems and control instruments