Specification :

Description of Single wall corrugated pipe extrusion line:
Single wall corrugated pipe extrusion line designed and developed by Qingdao HUASU Machinery Fabricate Co., Ltd can be used to produce corrugated pipes of PE, PP, PVC, EVA, PA... Plastic single-wall corrugated pipes produced by this line have features of high temperature resistance, resistant to corrosion and abrasion, high intensity, good flexibility, etc. They are widely used in fields of auto wire, electric thread-passing pipes, circuit of machine tool, protective pipes of lamps and lanterns wire, tubes of air conditioner and washing machine, etc. This pipe has large market.
This corrugated pipe extrusion line mainly contains Extruder, Corrugated Forming Machine, Mold Blocks, Cooling Equipment, Counting Machine and Winding Machine. It can continuously produce many kinds of diameter single wall corrugated pipe.
Extruder: It has high speed high efficiency screw, hard gear surface, FUJI invertor. This structure assures the material evenly heating, good plasticization and the extruding speed and efficiency.
Corrugator: Close structure. Mold blocks Through the gear transmission, Mold plate has water flowing to get cooling efficiency. The pipe cooling type is wind. This structure ensures High speed production and cooling. It can produce inner and outer layer smooth and corrugation uniformity pipe one time matching the corresponding molds.
Mold block: The design of structure is reasonable, wind cooling and replacement of the module is convenient and reliable
Winging machine: Moment motor, single/ double station winder.
Main technical parameter:
Diameter Scope
4.5-9 mm
9-32 mm
16-63 mm

Main Extruder
SJ-30
SJ-45
SJ-65

L/ D
30: 1
28: 1
30: 1

Output kg/ h ( kg/ h)
10
40
80

Main Motor ( KW)
2.2
11
18.5

Corrugator Power ( KW)
1.1
1.5
2.2

Mould Block Pairs
40
44
44

Cooling Type
Water and air cooling

Line Speed ( m/ min)
8-16
6-12
6-12

Counting Type
Sensing counting

Winding Type
Automatic/ Manual