HeatExchanger

Quantity Order:

Origin:

China

Payment Method:

Telegraphic Transfer (T/T)

Quantity:

Min 1 set

The hot water system is widely applied to hotel, restaurant, government, school,
hospital, industrial factory dorm and other occasions, those hot water is heated
by Stream-water exchanger. For long time, people widely adopt reserved heater(shell
and tube exchanger mainly), which occupy too many, and it is very hard to control
temperatures for this processes is similar with match-fired boiler, meanwhile
it is not average for the load requirement of boiler. So, this exchanger consumes
high energy , requires big room, complicated structure, produced scales easily,
clears difficult, thermal efficiency low. Based on these reasons, the exchanger
is provided with characteristic that is limited-reserved water and recovered
quickly, which can attain temperature to be controlled exactly. Meanwhile, as
adopting the newest technological exchanging organ, it makes areas small and thermal
efficiency high, and can clear scales automatism, service expediently. At
present, it is very popular for this product, particularly in Europe. And it uses
at hotel of star grade nine tenths interiorly.

Based on bringing advancing technology and mass experimental, we have produced 3
level floating coil heat exchanger which can get rid of dirty automatic, control
temperature exactly, characteristic of saving energy effect is notability all that
is well popular for all circles. It comes out based on continuous experiment
and innovation from original product.

Compared with aged product, device for increasing remnant stream condensation this
time utilize theory of steam-liquid current, then obtain the latest scientific
research, which settle problems of remnant stream remain in coagulate water in
aged product, which improve using rate of heat energy. Meantime, this equipment
plays the role of scattered-water implement In this way, one side it can avoid
energy loss resulted by quality instability of scattered-water implement, on the
other hand, it can also make the loss of floating tube reduce, the improved exchanger
can normally operate with pressure over 0.05Mpa, while the former one which
need at least 0.2Mpa.

The changed heat exchanger has been improved on clearing scales automatically and
controlling temperature automatically.

Recommend to your friends