Specification :

Product Description
Rs-485 to CAN Bus Isolated Introduction
The Rs-485 to CAN Bus Isolated Repeater utilizes automatic bidirectional switching requiring no control signal.
High efficiency, power & signal double isolated product. It can convert RS-232/ S-485/ RS-422 system fit with CAN Bus system. Then we can use CAN realize RS-485 signal to further transmission.

Support Can Bus 2.0A/ B protocol
Can set the RS-485 and CAN Bus baud rate and communication format by software
5V-30V support power, in-build power isolation module, isolation voltage DC2500V.
RS-485 support standard 300~ 115.2K bps baud rate, 15KV ESD protection.
CAN data cable transient interference suppression, communication baud rate can be 1Mbps
Power and data flow have indicator lamp, in case of fault treatment
Special data transmission will delay 1ms( serial port baud rate 9.6kbps, CAN Bus baud rate 100KBPS )
Industrial din rail and cover

ELECTRICAL
Isolation 3000Vsm
Lightning/ Surge Protection 1~ 2 lightning strikes
ESD Protection 15KV

CAN BUS Rs-485
Connector Type Terminal
Data Rate DC -1.2Mbps( canbus) , 0-115.2kbps( Rs-485
Extended Distance 10Km( canbus) , 1.2Km( Rs-485)

GENERAL
Operating Temperature -40 ~ 70C / -40 ~ + 158F
Operating Humidity 0 ~ 95% non-condensing
Mean Time Between Failure ( MTBF) > 70, 000hrs
Power Supply Input Voltage 9~ 18V DC
Power Supply Output Voltage 5V DC
Dimensions ( H × L× W) 80mm× 60mm× 23mm/ 3.15� × 2.36� × 0.91�