Products Catalog

Specification

IKA C 200 Calorimeter System

One system, four methods— manual, isoperibolic, dynamic, and time controlled
Automatic sample ignition
Compact modular design
Highly operator maintenance friendly
This easy-to-use calorimeter system allows you to accurately determine the Gross Calorific Value ( GCV) of samples in either liquid or solid state. The digital display provides simple programming and method selection. Unit is suitable for low through-put laboratories, teaching and training, e.g. technical schools, universities, and for industrial laboratories with less need for analyses.

Choose from four different methods depending on your requirements: manual, time controlled, isoperibolic, or dynamic. In the manual ( learning) method the user triggers ignition and the end of the measurement. The temperature changes are recorded at minute intervals. All calculations are manual.

In the other operating modes, ignition and calculation of GCV are automatic. The GCV is shown on the display. Acid correction of the GCV and caluculation of the heat values are performed manually. Requires manual filling of water and oxygen. Calorimeter is validated according to:

DIN 51900

ISO 1928

ASTM D240

ASTM D4809

ASTM D5865

ASTM D1989

ASTM D5468

ASTM E711

What' s Included:
measuring cell, decomposition vessel, oxygen filling station, and consumables for calibration and installation.

Specifications
Range 40, 000 joules
Interface 1 x serial ( RS232) ; 1 x parallel ( Centronics)
Measuring time isoperibol - up to 17 min; dynamic - up to 8 min; manual ( isoperibol) - up to 17 min; time-controlled - up to 14 min
Dimensions 15-3/ 4" W x 15-3/ 4" H x 15-3/ 4" D ( 400 x 400 x 400 mm)
Reproducibility 0.1% RSD ( relative standard deviation)
Power watts 120
Manufacturer number 8802501
Model C200
Brand IKA Put on Product PartnerRecommend to your friends