Products Catalog

Specification

CANARYSENSE GAS DETECTOR

Gas Detector for 4 Gases :
- H2S - hydrogen sulfide : 0-100 ppm ( 1ppm)
- O2 - oxygen : 0-30.0% ( 0.1% )
- CO - carbon monoxide : 0-500 ppm ( 1ppm)
- LEL combustibles : 0-100% LEL ( 1% )

Four alarm levels :
- Instant Low and High Alarm for all gases
- TWA ( time weighted average) for H2S, CO;
- STEL ( short term exposure limit) for H2S, CO; OL
- CO; OL ( over limit alarm)

Delivered ready for use with sensors, lithium polymer battey, stainless steel alligator belt clip, calibration hose/ cap and instructions
- Size : 10.7x6x3.6 cm, Weight : ± 160 gram
- Temperature operation : -20 to 58º C
- Humidity : 0% to 95% RH ( Non Condensing)
- Simple one-button operation
- Durable, stainless steel alligator clip

Integral concussion-proof boot for the most rugged environments
Continuous LCD shows simultaneous gas concentrations
Powered by a lithium polymer battery ( run-time typically 14 hours; recharge in less than 3 hours)
Provides 95 dB alarm tone and bright wide-angled alarm bars
Equipped with internal vibrating alarm for high noise areas
Backlight: in alarm ( auto) and on demand reactivation
Simple automatic calibration procedure
Full function self-test of: sensor, battery, circuitry and audible/ visual/ vibration alarms Put on Product PartnerRecommend to your friends