| Specification: | CARBURETTOR & INJECTOR
CLEANER
QUICK & STRONG helpless
with a new formula & GUNSPRAY
• Clean the automatic choke, linkage, throat, PVC valve, intake valve and combustion chamber, also for the surface of the machine, spare parts and overhaul time of the sludge, oil, grease, gum, varnish, carbon.
• Improve performance & acceleration engine, reducing fuel consumption and exhaust emissions. Recommended for use every 5, 000 to 6, 000 km.
• CFC Free ~ OZONE Friendly
Note: Be careful! Do not hit the surface of the paint, rubber and certain plastics. Immediately wipe dry if exposed & rinse with water.
How to use:
1. Carburetors & linkage: the engine is off, remove the air filter and spray the entire outer surface of the carburetor, including rod linkage & chokes. Let stand about 1 minute, then spray again to rinse away all dirt, grease and deposits.
2. Automatic Choke: with the engine off, spray the two ends of the choke valve, opening and closing by hand. Spray the cylinder vacuum to remove dirt & gum.
3. PCV valve: with the engine turned off, remove the PCV valve in the crankcase, insert the tip of the aerosol spray into the open end of valve & spray while moving valve. Turn on the machine and spray again to rinse clean all the dirt.
4. Neck carburetor & throttle plate: the machine is turned on, spray all parts of the carburetor throat to remove sediment / dirt attached to the throttle plate area and other parts.
Recommended for cleaning work in open spaces with proper ventilation. Avoid contact with painted surfaces, rubber, plastics, car body. If occurs, immediately wipe with a clean & dry cloth. During the application, it is normal if the machine becomes unstable and release white smoke from exhaust. |
www.jcprimo.com
