Products Catalog

See larger image

PRIMO RAD - COOL ( concentrate, 15, 30, 50)

Price	Contact Us For Price
Quantity Order:
Payment Method	Telegraphic Transfer (T/T), Cashier Order, L/C
Pack. & Delivery	Botol 1 Liter, Botol 4 Liter
Origin	Indonesia

Specification

Radiator Coolant, Lubricant, Anti-Rust & Anti-Scale ( Complete Formula)

• Special formulation: Glycol, anti-rust & corrosion, anti crust, lubricants.

• Prevents “ over-heating� when engine is hot by increasing boiling point > 100 ° C.

• Acts as a lubricant for the water pump, resulting in a more durable system, clean & free from rust & crust, with anti-heat properties.

• Safe for aluminum and all types of metals.

RAD-COOL is available in:
1. RAD-COOL CONCENTRATE ( packaging: Bottle 1 L) : Mix with water, not more than 70 ( RAD-COOL) : 30 ( water) ratio. It’ s recommended to mix with de-mineralized water* , DO NOT mix with hard water.

2. RAD-COOL 50 ( packaging: Jerrycan 5 L) : Ready to use & no need to add water - has 50% concentration. Designed to meet & exceed radiator OEM’ s requirements, especially for European & American cars and also for high-powered engines in sport cars.

3. RAD-COOL 30 ( packaging: Jerrycan 5 L) : Ready to use & no need to add water - has 30% concentration. Designed to meet & exceed radiator OEM’ s requirements, especially for medium-powered engines, such as in Korean & Japanese cars. Also suitable for motorcycles with cooling system, such as Honda, Yamaha, Suzuki & Kawasaki.

4. RAD-COOL 10 ( packaging: Jerrycan 5 L) : Ready to use & no need to add water - has 15% concentration. Designed for anti-rust & scale, and for cooling system maintenance of low to medium powered engines, such as in Korean & Japanese cars.

How to use:
1. DEPLETION: DO NOT open radiator cap when engine is hot. Open drain valve at the bottom of radiator ( do not open by force to prevent valve damage) . Dispose used radiator fluid in accordance with local regulations.

2. RINSING: Rinse radiator with PRIMO' s RADIATOR FLUSH which will help clean the cooling system. Fill radiator with PRIMO' s RADIATOR FLUSH and turn engine on with heater position in “ high� . Let engine run until normal operation, then turn off engine and drain radiator content. Fill radiator with demineralized water* and turn on engine with heater in “ high� position. Let engine run until normal operation is reached, then turn engine off and drain the radiator contents again.

3. FILL WITH RAD-COOL: Check your vehicle' s manual to find out the cooling system' s capacity. Fill radiator with the amount according to protection table. Do not fill more than maximum capacity.

* De-mineralized water is mostly free of particles and dissolved substances. Normal conductivity