Products Catalog

Specification

ZS-102

Description:
The ZS-102 Column Speaker employs multiple cone speakers arranged vertically on a single baffle board to provide wider horizontal directivity.

Spesifications:
Rated Input : 10 W ( Max. 15 W)
Rated Impedance : 100 V line: 1 k© ( 10 W) , 2 k© ( 5 W)
Sound Pressure Level : 90 dB ( 1 W, 1 m)
Frequency Response : 150 Hz - 10 kHz
Speaker Component : 12 cm cone-type × 2
Water Protection : IPX3 equivalent
Finish Enclosure: Extruded aluminum, silver gray, fully-glazed, baked paint
Grille: Punched aluminum net, black, matte, baked paint
Mounting bracket: Steel plate, silver gray, fully-glazed, baked paint
Dimensions : 167 ( W) × 335 ( H) × 141 ( D) mm
Weight : 3.4 kg ( unit only) , 4 kg ( including mounting bracket)
Accessory : Mounting bracket … 2, Mounting bolt, washer, packing … 1 set

Note: A drainage hole is provided on the speaker cable side of the cabinet. When installing the speaker outdoors make sure that its speaker cable side faces the ground. The speaker must be installed upright or facing down. Installing the speaker in any other position may render the drainage hole ineffective