POSHING PROCESSING & EFFECTS SYSTEM

Quantity Order:

This series is including: Digital Audio Processor, Active Crossover, Enhencer, Compressor, Equlizer, Sequency Controller, Mixing Console

You may also visit our on-line introduction at http://www.yt-hy.com, which includes our latest product lines.
DIGITAL AUDIO PROCESSOR VT206
1 Input : Active Balanced,20K
2 Max Input level : +20dBu
3 Input Gain Range : -50dB~+12dB
4 Output : Active Balanced ,100 O
5 Max .Output Level : +20dBu
6 Output Gain Range : -50dB~+12dB
7 EQ Filter Types : 2nd Order High or Low Shelf , Parametric
8 Shelving Filter Boost/Cut Range : +12dB/-24dB
9 Shelving Filter Frequency Range : 19.8Hz~21.5KHZ
10 Parametric Filter Boost/Cut Range : +12dB/-24dB
11 Parametric Filter Frequency Range : 19.8HZ~21.5KHZ,1/36 Octave Steps
12 Parametric Filter Bandwidth : Q:0.2~36
13 Output Delay : 0~682 ms
14 HPF and LPF Frequency Range : 20.4HZ~20.9KHZ,Off
15 Threshold Range : -10dBu to +20dBu
16 Attack Time Range : 1ms to 90ms
17 Release Time Range : 10ms to 1 Second
18 Frequency Response : 20Hz to 20KHz, ± 0.25dB
19 THD : <0.01%@1KHz, +10dBu
20 Dynamic Range := 120dB 20Hz~20KHz A-weighted
21 Audio Sampling Rate : 48KHz
22 Propagation Delay : 1.85mS
23 Signal LEDs & Clip (Input) : -20/Mute,-10,0 Clip(dBu)
24 Signal LEDs & Clip(output) : -20/Mute,-10,0,+10,Clip(dBu)
25 AC Requirements: ~220V,50Hz, 30W max
26 Dimensions(H × W × D)mm: 47.5 × 483 × 333
27 Net weight: 5.8Kg

ACTIVE CROSSOVER FP-232
Frequency point gain compensation function, It happen distortion when frequency response unbalance without the function and The extent of frequency point get attenuation deeply, disjoint between treble and bass frequency. Under this function. It can reach the best tone and is beneficial to joint the frequency point of treble and bass frequency. Middle keystoke is the selection of slope. Press the button, input less than 150Hz bass signal. The octave fade is 36dB/ OCT, no Mediant output. The range of bass frequency is very pure. Tone sounds fructify.
Specifications Unit FP-232
Input
Input Impedance £¾50K¦¸ balanced £¾25K¦¸ unbalanced
Max. Input Level dBU +22
Output
Output Impedance 200¦¸, balanced 30¦¸,balanced
Max. Input Level dBU +21
Ideal Performance
frequency response 20Hz~20KHz +0/-0.5dB
Low Frequency Output dB £¾94(Stereo Mode) £¾92(Mono Mode)
Low Frequency Output dB £¾90(Stereo Mode) £¾88(Mono Mode)
dynamic range dB 106
distortion & Hom £¼0.004%+ +4dBU, 1KHz
Crossed Frequency
Low/High Frequency Hz 45~960 or 450~9.6K(X10)
Low/High Frequency Hz 45~960 or 450~9.6K(X10)
Mid./High Frequency Hz 450~9.6K
Dimension mm 483x150x43
Carton Size mm 520x200x100
Net Weight kg 1.81
Gross Weight kg 2.56

ENHENCER EX-2200
1.Input impedance:40kΩ,balance
2.Max output power:+20dBu,Unbalance
3.Output impedance:40Ω,balance
4.Frequency range:10Hz-50KHz,+0,-1dB
5.T.H.D@+4dBu:0.005%
6.Dimension:483x150x43mm
7.Car ton Size:520x200x100mm
8.Net weight :2.1KG
9.Gross weight : 2.35KG

COMPRESSOR EL-2000

EQUALIZER EQ-231
1. requency Bands:2x31 band,1/3 octave
2.Filter type: constant Q, 3% center accuracy
3.Range of Filter control:+/-6dB or +/-12Db
4.Frequency response:20Hz to 20KHz,+0.5dB
5.Total harmonic distortion:<0.3%
6.Signal to noise ratio:>-95dB
7.Crosstalk:>-60dB
8.Standard input sensitivity:1.4v
9.Input impedance(balance/unbalance)
10.Output impedance:typical

Recommend to your friends