PD Hanging bad discharging centrifuge

Quantity Order:

Payment Method:

Telegraphic Transfer (T/T)

PD Hanging bad discharging centrifuge

STRUCTURES AND PROPERTIES 

PD centrifuges are filter equipment with hermetic closure procedure task,intermittent operation and hanging bag off-sitedischarge,The material is fed into the drum from the top; under the action of the centrifugal force field,the liquid-phase passes through the filter medium and is discharged out of the machine,while the solid-phase material is retained inside the drum;after the machine is stopped,the liquid-block plate togerther with the filter bag is hoisted with the sling out of the machine and transferred to the designated discharge site.The centrifuge has such features as smooth start-up,adjustable separating factor,targe volume,high efficiency,easy & convenient operation,quick discharge,good safety,clean environment,low labor strength,etc.
Model PD centrifuge has got rid of traditional suspending type of leg-support,instead,it adopts flat-plate counterweght and high-viscosity damping agent vibration isolator for absorbing the vibration and the installation requires no foundation.
Model PD centrifuge are allwith fully-open large hinged cover,quick-open-type hanging bag discharging,and have such features as motor's over-heat,overload & over-vurrent protection as well as other interlock protection.

APPLICATIONS

It is applicable to the separation of suspension containing solid-phase granules with the diameter greater than 0.01mm.and especially applicable to the filtering of toxic and flammable materials. It has found wide applications in such trades as chemical,pharmacy,food,light industry,ect. For example: gypsum,thiamine,mirabilite,ferric sulfate,copper sulfate,nickel sulfate,potassium chloride,acetic acid,borax,soda,rubber additives,dye,plastic raw material, soap, grease, all kinds of resins, food salt,sodium glutamate,food additives,starch sugar-making, vitamins,antibiotics,herbicide,insecticide,the dehydration of such mineral fines as copper,zine,aluminum,etc.

ORDER NOTICE

Material: The parts contacting the processing material may be made of stainless steel,carbon steel,with rubber liner,with plastic liner,of titanium alloy,Hastelloy,etc.
Mode of Drive: Driven by ordinary motor,anti-explosion motor with clutch; driven by electromagnetic speed control motor; driven ordinary motor or anti-explosion motor or direct connecting anti-explosion motor with frequency converter,etc.
Type of Cover: Small hinged cover,large hinged cover,etc.
Mode of Braking: mechanical braking or electric braking.
Machine Base : With foundation or without foundation.
It can be designed and manufactured as per GMP Specifications.

Recommend to your friends