WATER DISTILLERS.
Automatic Water Stills With Storage Tank.

* Construction : 2004, 2008 as bench/ wall model and 2012 as bench model.
* Distillate quality : complies with all international pharmacopaeia requirements. Conductivity approx. 2.3 microSiemens.
* Evaporator : made of stainless steel, easily accessible by removing condenser.
* Condenser ( cooler) : with baffle made of stainless steel.
* Water supply : Centrally through solenoid valve with connection for pressure hose 12mm diameter. The solenoid valve is built into the unit and starts the flow the inflow of tap water when switched on and stops it when the storage tank is full, thus avoiding unnecessary water consumption.
* Distillate withdrawal : on the front of the unit.
* Electronic impurity detector : switches the still off should there be a large amount of impurities in the evaporator.

Water Still for single distillation 2004

* Water Still for single distillation ( fully automatic) with storage tank, suitable for both bench and wall mounting.
* Very good distillate quality; conductivity approx. 2.3 µ s / cm at 25 ° C ( see " Technical Details" ) .
* The distillate storage tank accepts twice the hourly capacity of the still.
* Electronic level switch switches the still off when the storage tank is full and restarts it automatically when distillate is withdrawn.
* Electronic impurity detector switches the unit off in case of high degree impurities of the water in the evaporator, the red pilot lamp " Clean" will glow.
* Thermostatic low water cut-off.
* Economical energy consumption by distillation of the heated cooling water.