LABORATORY HOT PLATE & STIRRING HOTPLATE.
Made in Torrey Pines Scientific - USA

Model : HP 10-2 & HS10-2
Ceramic Top Plated
Dimensions : 200 x 200 mm

Stir or heat and stir on a rugged, quick heating, flat, white solid ceramic heater surface.

ï ¿ ½ Heat to 450ï ¿ ½ C on plate surface in minutes
ï ¿ ½ Stir from 100 to 1500 RPM on each stirring position with individual controls
ï ¿ ½ Plate size on the HS10, HP10 and ST10 is: 20.32 x ( 20.32cm .
ï ¿ ½ Plate size on the HS1, HP1 is 15.24 x 15.24 cm
ï ¿ ½ Plate size on HS11, HP11 is 30.48 x 30.48 cm
ï ¿ ½ Solid ceramic heater surface for excellent chemical resistance

Heater plate mounted in cast aluminum frame that remains cool for safety
ï ¿ ½ Efficient 600-watt heaters on the HS10 and HP10
ï ¿ ½ Efficient 400-watt heaters on the HS1 and HP1
ï ¿ ½ Powerful 1400 watt heaters on ceramic-topped HS11 and HP11 and 1200 watt heaters on HS11A and HP11A
ï ¿ ½ Fused for safety
ï ¿ ½ Rugged cast aluminum chassis
ï ¿ ½ UL, CSA, and CE certified

Product Description:

Each Torrey Pines Scientific hot plate is made with a cast alumunium chassis that is painted with chemically resistant epoxy paint.
The chassis is designed to keep spills out of the case.
Heating and stirring controls are solid state with individual indicator lights which illuminate when either is activated.
The controls are well forward of the heater surface to prevent accidental burns.
Additionally, the solid ceramic heater plate is framed in cast aluminum and is designed to keep heat from the edge of the heater plate. .

The stirrer features a solid state control capable of stirring an aqueous solution from 100 to 1500 rpm.
The control has an OFF position fully counter-clockwise, and is continuous over 270 degrees of rotation from minimum to maximum speed when turned on.
The magnet is a circular disc with twenty pound pull strength and is capable of stirring more than two liters of aqueous solution.

The heater control has OFF, LO, and HIGH positions for quick setting, and a smooth infinite control of about 270 degrees between Lo and High settings.
The control will regulate a set point to ï ¿ ½ 2.5ï ¿ ½ C.

Control knobs are specially selected to provide easy use and positive, tactile feel. All units are fused, and have a 3-foot long detachable AC line cord with a male plug that matches the local standard.

Product Specification:

Hot Plate:
Solid ceramic
Maximum temperature of the plate surface Aluminum: 400ï ¿ ½ C
Ceramic: 450ï ¿ ½ C
Time to maximum temperature, unloaded Aluminum: 10 minutes
Ceramic: 3 minutes
Temperature control Aluminum: + / -2.5ï ¿ ½ C
Ceramic: = / -2.5ï ¿ ½ C
Heater power, watts HS1 & HP1: 400 watts
HS10 & HP10: 600 watts
HS11 & HP11, Aluminum: 1200 watts
HS11 & HP11, Ceramic: 1400 watts

Stirrer:
Speed range unloaded
100 to 1500 rpm
Maximum load, aqueous HS1, ST1, HS10, ST10: over 2 liters
HS11 and ST11: over 10 liters

Electrical:
230VAC/ 50Hz
Power consumption HS10 and HP10: 650 watts
HS1 and HP1: 450 watts
HS11 & HP11: 1450 watts

PT OCTA PRIMA LESTARI
Rukan Mitra Matraman Blok B-12
Jl. Matraman Raya 148 - Jakarta
Tlp : 85918154-55 , 8512595
Fax : 85918178
Web : www.octaprimalestari.com

We are sole agent ! !