Specification :

PIN CODE READER for Chrysler

Pin Code reading device for Chrysler ( TYPE2)
Read data from Immobiliser controler and show the pin code on the screen of the device directly

Steps:
1.Remove the IMMO bos from the vehicle.The location is on the ignition lock.
2.Desolering the two pins of coil connection and removing the circuit from the box.
3.To find an EEPROM " 24LC02B"
4. Clear every pin of 24LC02B and connect the clips with microchip, black point to pin1 of 24LC02B.
5. Then press " Read Pin" button on the unit. The screen will show the " pin code"